Overview
The Crown Automotive manual transmission shift fork insert, part number J8130274, is a fork insert for first, second, third and fourth gear in the T18 transmission.
The insert fits Jeep CJ5, CJ6 and CJ7, Cherokee SJ, Commando and Jeepster Commando models, and J-series trucks, from 1966 to 1984.
Key features
- Fork insert for first through fourth gear
- Built for the T18 transmission
- Covers CJ, Cherokee SJ, Commando, Jeepster and J-series applications
- Direct fit for the listed CJ, Cherokee SJ, Commando and J-series models.
Before you open the transmission
A shift fork sits inside the transmission and moves the synchronizer sleeve when the shifter selects a gear. Each fork pushes against a sleeve, so its contact faces take constant load. Over time those faces can wear, which makes shifts feel rough or leaves a gear hard to engage.
Because the fork is internal, replacing it means removing the case and handling the shift rail and detent parts. Lay out the parts in order, check that the rail moves smoothly, and inspect the synchronizer rings and gear teeth for damage while the transmission is open.
Forks are often checked as a group. If one fork shows wear, the others on the same shaft are worth examining, since they experience the same use. Clean all parts thoroughly and oil them before reassembly so the first shifts after installation are smooth.
- Check fork contact faces for scoring or uneven wear
- Inspect synchronizer rings when the case is open
- Confirm the T18 transmission before ordering
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J8130274 |
| UPC | 848399070217 |
| Transmission | T18 |
| Gears | First through fourth |
| Fit type | Direct fit |
Vehicle fitment
It fits 1974–1979 and 1981–1983 Jeep Cherokee (SJ); 1966–1979 Jeep CJ5; 1966–1974 Jeep CJ6; 1976–1979 Jeep CJ7; 1966–1967 Jeep Commando; 1966–1973 J-2500; 1968–1970 and 1972–1973 J-2600; 1968–1970 J-2700; 1968 J-2800; 1968–1970 J-3500, J-3600, J-3700 and J-3800; 1971–1973 J-4800; 1974–1979 and 1981–1984 J10 and J20; and 1968–1971 Jeep Commando.
Covered vehicles are limited to the CJ, Cherokee SJ, Commando and J-series models above. Wrangler, Wagoneer and Cherokee XJ models fall outside this fit.
Installation notes
Shift fork inserts are internal transmission components, so confirm the T18 reference on your unit before any teardown.
What’s included
The product is a single fork insert, and no other parts are named.









