Overview
The Crown Automotive 52002553 is a steel leaf spring shackle bushing spacer for the shackle end of a leaf spring. It is a direct fit for the 1987–1995 Jeep Wrangler (YJ) in the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
The spacer is made of steel and installs at the shackle end. Before fitting, measure your original spacer and bushing and compare them with this part’s dimensions.
Shackle wear and spacers
A shackle bushing spacer sits inside the spring eye and fills the gap between the bushing and the shackle plates, keeping the spring end from moving sideways. When the spacer or bushing wears, the spring can rattle, the shackle can bind, and the steering may feel vague over rough ground. Look for flattened, cracked or corroded spacers, and check whether the bushings have grown loose in the eye.
Spacers are often replaced together with the shackle bushings and pivot bolts, since a worn part can wear a new one faster if the two are mixed. Clean the spring eye and the shackle plates before fitting, and apply a light grease to the bushing surface so it seats smoothly. After the first few drives, retighten the fasteners and listen for knocks that point to a part not fully seated.
- Replace shackle bushings and spacers as a set
- Measure the old spacer before ordering
- Check fasteners after the first drives
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52002553 |
| UPC | 848399012866 |
| Material | Steel |
| Application | Shackle end |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1987–1995 Jeep Wrangler (YJ) in the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
Other Jeep models and Wrangler model years outside 1987–1995 are not covered. Confirm your vehicle’s year, model and trim before ordering.









