Overview
The Crown Automotive shifter boot, part number J5752010, is an interior shifter boot for 1980 to 1981 CJ Jeep vehicles with an SR4 manual transmission. It covers the opening around the shift lever in the cab.
A shifter boot seals the floor opening around the shift lever against dirt and water. Confirm the specific CJ model, such as CJ5 or CJ7, and the dimensions before ordering.
Key features
- Interior shifter boot
- Written for 1980 to 1981 CJ vehicles with an SR4 manual transmission
- Replacement part from Crown Automotive for Jeep applications
- It is a direct fit replacement for 1980 to 1981 CJ models with an SR4 manual transmission.
Interior boot maintenance
A cab shifter boot does quiet work. It keeps grit off the shift linkage, stops water from running down through the floor opening, and keeps the shifter area looking clean. Rubber in that spot takes a lot of heat and handling, so the folds tend to crack first, usually where the boot flexes most.
Inspection is simple. Look at the folds, the lip where the boot meets the floor, and the top where it wraps the shifter. Feel for stiffness or soft spots. If you see water stains on the floor mats near the shifter, the seal is likely failing. Clean the boot with mild soap and water and let it dry fully. Avoid solvents, which can harden the rubber.
- Check the floor seal under the boot when you replace it
- Keep the shifter area dry to slow rubber wear
- Replace a torn boot before grit reaches the linkage
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J5752010 |
| UPC | 848399066098 |
| Years | 1980 to 1981 |
| Transmission | SR4 manual |
| Type | Interior shifter boot |
Vehicle fitment
Years and an SR4 manual transmission are given, but no specific CJ model is stated, so match the boot to your model before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Lay out the box contents, including any shifter trim plate or screws, before starting the installation.









