Overview
The Omix-ADA shifter boot 18806.02 is a replacement for T150, T14, T15 and T18 manual transmissions. It is a direct OE replacement built to original specifications.
Omix-ADA backs the boot with a limited five year warranty. Compare the four transmission names with your own transmission before ordering.
Key features
- Shifter boot for T150, T14, T15 and T18 transmissions
- Direct OE replacement built to the original specifications
- Covered by a limited five year warranty.
- Part number 18806.02 identifies this Omix-ADA boot
Transmission boots and wear
A shifter boot on a manual transmission works as a seal between the cab floor and the shift lever. It keeps dust and water from reaching the shifter pivot and the linkage below. Because the boot flexes every time the lever moves, it wears from the inside as well as the outside, often at the fold closest to the floor.
When replacing a boot, look at the shifter while it is exposed. Worn bushings or a loose lever can strain a new boot and cause it to split early. Work the new boot over the lever slowly so the lip is not stretched. Once it is in place, check that it lies flat and that the shifter moves freely through its gates.
- Check the shifter for play before fitting the new boot
- Work the boot over the lever without stretching the lip
- Confirm the boot lies flat against the floor
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 18806.02 |
| UPC | 804314019884 |
| Compatible transmissions | T150, T14, T15, T18 (manual) |
| Warranty | Limited five year warranty from Omix-ADA |
| Part type | Shifter boot |
Vehicle fitment
No vehicle years, models or chassis codes are stated. Omix-ADA ties this boot to the four transmissions above.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shifter boot for T150, T14, T15 and T18 manual transmissions.









