Overview
The Crown Automotive 55017480 is a steel hood prop rod that holds the hood open during service. Hardware is not included with the rod.
Crown Automotive describes itself as a manufacturer and distributor of replacement parts for Jeep vehicles, but no model or year is named for this rod.
Key features
- Steel construction
- Hood prop rod
- Hardware not included
- Crown Automotive part number 55017480
Replacing a hood support
When a prop rod wears out, the hood can slip or fail to hold its height, which is a safety concern when working under it. Before replacing the rod, open the hood fully, note the mounting points and the angle of the rod, and check whether the bracket itself has cracks or worn holes. A new rod should sit at the same angle as the old one so the hood stays level.
Steel rods are durable, but they can rust where the finish is chipped. Clean any surface rust with a wire brush, apply a coat of paint or a rust inhibitor, and inspect the ends each time the hood is serviced. Replace the hardware if the threads or pivot holes are worn, since loose fasteners are a common cause of hood movement.
- Note the original mounting angle
- Replace worn hardware along with the rod
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 55017480 |
| UPC | 848399019650 |
| Material | Steel |
| Included | Prop rod only |
| Hardware | Not included |
Vehicle fitment
Before installing, compare the rod with the original prop rod on your vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting hardware is not supplied, so have fasteners ready that match the original prop rod attachment points on your vehicle.
What’s included
The steel hood prop rod.
Not included: Hardware and fasteners for mounting the rod.
