Overview
The Crown Automotive SE04 is a heavy-duty shackle kit that provides 3/4 inch of lift. It is sold without bushings and includes 4 plates, 2 spacers and hardware.
Crown Automotive has made replacement parts for Jeep vehicles for over 50 years. The kit measures 5-1/2 inch from bolt hole to bolt hole.
Key features
- Provides 3/4 inch lift
- 5-1/2 inch from bolt hole to bolt hole
- Includes 4 plates, 2 spacers and hardware
- Heavy-duty construction
- Sold without bushings
Lift and alignment checks
A shackle kit that adds lift changes the angle of the leaf spring and the driveline, so the vehicle will sit a little differently after installation. Check the front axle and driveshaft angles once the kit is in, and watch for vibration at highway speeds that could signal a driveline problem. Shackle changes also alter steering geometry slightly, so an alignment check is a sensible step.
Plates and spacers often need to be checked against brake lines, hoses and wiring, because the position of nearby parts can shift with the new geometry. Re-check all fasteners after the first few trail runs and inspect the bolt holes for elongation. Keep bushings on hand so worn ones can be replaced during the same job rather than later.
- Check driveline angles after installation
- Recheck alignment after the lift
- Inspect brake lines and hoses for clearance
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | SE04 |
| UPC | 848399074321 |
| Type | Heavy-duty shackle kit |
| Lift | 3/4 inch |
| Bolt hole to bolt hole | 5-1/2 inch |
| Included | 4 plates, 2 spacers, hardware |
| Bushings | Not included |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit lifts the vehicle 3/4 inch, so check alignment and driveline angles after installation. Bushings are not supplied, so obtain them separately before fitting.
What’s included
Four plates, two spacers and hardware.
Not included: bushings.









