Overview
The Crown Automotive 52006289 is a rear left sway bar bushing for the 1993–1998 Jeep Grand Cherokee (ZJ). It is marked as a direct fit for the rear left position. A sway bar bushing mounts the stabilizer bar to the frame and lets the bar rotate as the suspension moves.
Key features
- Rear left position
- Direct fit designation
- .62 inch inner diameter for the sway bar
- Crown Automotive part number 52006289 with UPC 848399013757
Installing a ZJ sway bar bushing
The bushing sits between the sway bar and its bracket on the frame, and it lets the bar turn as the suspension cycles. Confirm the bushing seats fully and that the split, if present, is oriented toward the bar. Rubber bushings should be lubricated before they are pressed on, using a lubricant made for rubber, since oil-based products can cause the material to swell and weaken.
Check the bar and brackets for rust, cracks, and bent mounts before installing. Replace bushings in matching pairs, so both sides of the bar react the same way. Once the vehicle is on the ground, re-check the bracket bolts after a short drive, because rubber settles as it seats.
- Use lubricant made for rubber
- Inspect the bar for rust at the mount
- Replace both sides together
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52006289 |
| UPC | 848399013757 |
| Position | Rear left |
| Inner diameter | .62 inch |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1993–1998 Jeep Grand Cherokee (ZJ) in the Base, Laredo, Limited, Orvis, SE and TSi trims, including the 5.9 Limited.
Other Jeep models, including the Grand Cherokee WJ from 1999 to 2004, are outside this fit. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.









