Overview
The Energy Suspension 2.1104G is a black polyurethane motor mount sold as a pair, fitted to Jeep XJ Cherokee, Comanche, Wagoneer (SJ), Wrangler LJ, Wrangler TJ and Wrangler YJ models. The existing outer metal shell must be reused with it.
The mount pairs polyurethane cushions with thick stamped steel bracketry and sits in the Left position. It fits XJ models from 1987 to 2001 and TJ models from 1997 to 2006.
Key features
- Black polyurethane cushions
- Sold as a pair
- Requires reuse of the existing outer metal shell
- Thick stamped steel bracketry
Reusing the outer shell
The outer metal shell is the sleeve that holds the bushing in the frame bracket, and it carries the mount’s load into the chassis. Reusing it means the shell’s condition decides how long the new set lasts. Look for bent edges, cracks at the welds, and heavy rust where the shell seats against the bracket, because a damaged shell will not hold the new bushing square.
Polyurethane cushions are firmer than rubber. They transfer more engine vibration, which can feel noticeable on a trail-driven Wrangler or a Cherokee used daily. Many owners reduce that by checking engine position and balance mounts after installation. Plan to recheck the bolts after the first few drives, since new bushings settle slightly.
- Inspect the outer shell for bends and weld cracks
- Clean rust off the bracket seat before installing
- Support the engine before removing the old mount
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 2.1104G |
| UPC | 703639714910 |
| Part type | Motor mount |
| Color | Black |
| Bushing material | Polyurethane |
| Construction | Stamped steel bracketry with polyurethane cushions |
| Position | Left |
| Quantity | Sold as a pair |
| Outer shell | Existing outer metal shell reused |
Vehicle fitment
The manufacturer fitment list covers 1987–2001 Jeep Cherokee (XJ) (Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport), 1987–1992 Jeep Comanche (Base), 1987 Jeep Wagoneer (SJ) (Base), 2004–2006 Jeep Wrangler (LJ) Unlimited and Unlimited Rubicon, 1997–2006 Jeep Wrangler (TJ) and 1987–1995 Jeep Wrangler (YJ).
CJ models and the Cherokee (SJ) are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The existing outer metal shell must be reused, so inspect that shell before fitting the new polyurethane set. Support the engine securely before removing the old mount.
What’s included
A pair of black polyurethane mounts is described.
Not included: the outer metal shell, which must be reused from the existing mount.


















