Overview
The Crown Automotive 5359275H is a front brake hub for the 1979–1988 Jeep J20.
It is a direct-fit replacement hub for the front axle of the Jeep J20. Check the part number against your truck’s brake setup before buying.
Key features
- Front brake hub
- Replacement type
- Direct-fit design
Checking the hub before install
A front brake hub carries the wheel bearings and the rotor on the spindle, so its mounting face and bolt pattern have to line up with the axle it goes onto. Before fitting a replacement, compare the old hub’s stud count, bearing seat and bolt pattern with the new part. Worn hubs often show cracked flanges, scored bearing surfaces or loose studs, and these signs are worth checking when the brake pedal pulses or the wheel wobbles.
Hubs are usually replaced along with the bearings, seals and rotor, since working on one part exposes the others. Clean the mating surfaces thoroughly and tighten fasteners to the torque in your service manual rather than by feel. Re-check lug nut torque after the first few miles of driving.
- Compare the bolt pattern with the removed hub
- Inspect the bearing seat for scoring or wear
- Replace bearings and seals during the same job
- Check the rotor face for runout after mounting
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 5359275H |
| UPC | 848399042849 |
| Product type | Front brake hub |
| Position | Front |
| Type | Replacement |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1979–1988 Jeep J20 only.
- 1979–1988 Jeep J20
No other Jeep or truck model is covered for this front hub. Check the year, model and trim against your truck before buying.
What’s included
The 5359275H front brake hub.









