Overview
The Crown Automotive 5AHK6 is a six piece flat black fender flare kit for front and rear positions, and it includes installation hardware. Fender flare kits extend coverage over the wheel openings, and this kit is finished in flat black. It is a direct fit kit, but no vehicle year, model or trim is confirmed, so confirm the fit before mounting.
Key features
- Flat black finish
- Six piece kit
- Front and rear positions
- Installation hardware included
Kit fit and front versus rear
Front and rear flares rarely share the same shape, so a kit marked for both positions should be laid out before any hole is drilled. Compare the curve, length and mounting tabs of each piece with the wheel opening it is meant to cover. Flat black finishes hide small dents well, but they show scuffs quickly, so keep a touch-up pen nearby.
Drilling into a body panel is the step that causes the most regret. Mark each hole, check the tab alignment twice, and start with a smaller pilot hole where possible. Remove burrs and treat bare metal with primer. Flat black paint on a flare can fade with sun exposure, so a protectant helps keep the color even.
If a piece does not line up with the wheel opening, check whether it is meant for the same side and position before adjusting the holes. Forcing a flare into place can crack mounting tabs and strain the body. Dry-fit with the tires at their normal height, then tighten the hardware in stages.
- Lay out all pieces before drilling
- Mark and check every mounting hole
- Prime bare metal after deburring
- Dry-fit with tires at normal height
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 5AHK6 |
| UPC | 848399077780 |
| Finish | Flat black |
| Pieces | 6 |
| Position | Front and rear |
| Included | Installation hardware |
Vehicle fitment
Fit for this kit is not confirmed. Compare the pieces with the flares on your vehicle and confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes installation hardware. Lay out all six pieces and compare them with each flare position before drilling or fastening anything, and wear eye protection when drilling metal.
What’s included
Six piece flat black fender flare kit with installation hardware, for front and rear positions.









