Overview
The Crown Automotive Rear Fender Flare Hardware Kit, part number 5AGRRKIT, is a rear fender flare hardware kit for the 1984–1994 Jeep Cherokee XJ.
The kit includes 2 U-clip nuts, 14 push-in fasteners, 18 nuts and 12 screws. Compare the rear mounting points with your flare before buying to confirm the hardware suits it.
Key features
- Two U-clip nuts, 14 push-in fasteners, 18 nuts and 12 screws
- Designed for the rear fenders
Rear flare alignment and wear
Rear fender flares take the same road spray and flex as the front, but they often see more contact from tires and trail debris. Hardware that is worn or undersized can let the flare shift, which shows up as rattles or uneven gaps along the wheel opening.
Matching the hardware to the mounting points on the flare is the key step. Rear mounting points may differ from the front, so count the holes and check each fastener before starting. A test fit before final tightening shows whether the flare sits square.
Keep the fastener area clean and dry, and check it after rough trail use. Loose hardware caught early is easy to tighten, while a flare that has been pulled out of alignment may need its holes cleaned or reshaped.
- Count the mounting points before installing
- Test fit the flare before final tightening
- Recheck the hardware after rough trail use
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 5AGRRKIT |
| UPC | 848399077766 |
| Front or rear | Rear |
| Contents | 2 U-clip nuts, 14 push-in fasteners, 18 nuts, 12 screws |
| Fitment type | Direct fit |
Vehicle fitment
It is for the rear fenders on the 1984 to 1994 Jeep Cherokee XJ.
The fit list runs through 1994, so it does not include the 1995 or 1996 XJ. Confirm your vehicle’s year, model and trim before ordering.
What’s included
2 U-clip nuts, 14 push-in fasteners, 18 nuts and 12 screws.









