Overview
The Crown Automotive J0938111 is a brake shoe return spring for 10 inch drum brakes on the 1966–1971 Jeep CJ5, CJ6, Commando and Jeepster Commando. It goes above the adjusting screw and is usable on either side, front or rear.
Return springs retract the shoes after braking, and a tired spring can leave the brakes dragging.
Key features
- Return spring for 10 inch brakes
- Mounts above the adjusting screw
- Driver or passenger side
- Front or rear use
Why return springs matter
Return springs pull the brake shoes back off the drum once the pedal is released. When one weakens or fatigues, the shoes can stay slightly in contact with the drum, which builds heat, wears lining faster and can make the pedal feel different. A spring that is stretched, discolored from heat, or has a kinked coil is due for replacement.
Return springs are usually replaced in pairs, and the shoe hold-down hardware and adjuster are worth checking at the same time. Make sure the adjusting screw turns freely and the shoes sit square on the backing plate after reassembly. Use the same spring position on each side so both shoes release evenly.
- Check the spring for stretching or heat discoloration
- Inspect the adjuster for corrosion or sticking
- Clean the backing plate before fitting new hardware
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0938111 |
| UPC | 848399055511 |
| Product type | Drum brake shoe return spring |
| Brake size | 10 inch |
| Spring location | Above adjusting screw |
| Position | Front or rear, driver or passenger side |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1966–1971 Jeep CJ5, CJ6, Commando and Jeepster Commando.
CJ models before 1966 are not on this list, and the spring is for 10 inch brakes only. Confirm your vehicle’s year, model and trim before ordering.









