Overview
The Crown Automotive J0637905 is a front brake shoe return spring for early Willys and Jeep drum brakes. It fits the CJ3, CJ5 and CJ6 from 1959 to 1965, with the CJ5 also covered for 1971, and the Willys CJ-2, CJ-3, CJ-5, CJ-6 and MB.
The return spring pulls the shoes back off the drum when the brake pedal is released.
Key features
- Front brake shoe return spring
- Direct-fit early Jeep application
- Replaces a worn or stretched spring
Return spring behavior
The return spring pulls the brake shoes back off the drum after the pedal is released, and it holds them against the anchor so the shoes sit clear of the drum. Springs on older drum brakes work hard over many years, so the coils can stretch or lose tension. A tired spring lets the shoes drag, which generates heat, wears the lining unevenly and can make the pedal feel inconsistent.
When replacing a return spring, look at the hold-down springs, the adjuster and the anchor pin at the same time. Worn hardware in those spots can allow the shoes to move out of position even when the new spring is correct. Replacing springs in pairs keeps the tension even across the axle, and it is a good time to clean the backing plate and check the wheel cylinders for leaks.
- Compare the stretched spring against a new one
- Inspect the hold-down springs and pins
- Replace both springs on the same axle
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0637905 |
| UPC | 848399051865 |
| Product type | Drum brake shoe return spring |
| Position | Front |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1959–1960 CJ3, the 1959–1965 and 1971 CJ5, the 1959–1965 CJ6, the Willys CJ-2 (1946–1949), CJ-3 (1949–1958), CJ-5 (1955–1958), CJ-6 (1956–1958) and the 1941–1942 Willys MB.
Other CJ5 years, such as 1966–1970, are not on this part’s list. Confirm your vehicle’s year, model and trim before ordering.









