Overview
The Crown Automotive J0945306 is an adjusting screw brake shoe return spring for 10 inch drum brakes. It fits either the driver or passenger side and either the front or rear position, so match the position of the spring you are replacing.
Key features
- Adjusting screw spring design
- 10 inch drum brake application
- Driver or passenger side, front or rear
- Crown Automotive replacement part J0945306
Adjusting screw springs
An adjusting screw spring works alongside the adjuster screw to hold the shoe against the screw and keep the shoe in place. The spring keeps tension on the shoes so they retract away from the drum when the pedal is released.
Before fitting, compare the new spring with the old one for hook shape, coil diameter and overall length. Springs that look right can still sit differently, which changes how the shoe travels, so set the spring in the same hook positions as the removed part.
Springs that have overheated lose tension and can let the shoe drag. Replace the spring with the shoes and adjuster when wear is found, and clean the backing plate before reassembly.
- Confirm hook shape and coil diameter
- Set the spring in the same hook positions
- Replace when heat has reduced tension
- Clean the backing plate before reassembly
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0945306 |
| UPC | 848399056198 |
| Brake drum size | 10 inch |
| Position | Driver or passenger side; front or rear |
| Spring type | Adjusting screw spring |
Vehicle fitment
Fit depends on your vehicle’s year, model and trim. Match the 10 inch drum size and the side and position of the spring you replace before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brake springs store tension, so release the old one with proper tools and wear eye protection.
What’s included
One adjusting screw spring is included. Other brake hardware is not included.









