Overview
The Crown Automotive J5352620 is a brake light switch that completes the circuit to the rear brake lights when the brake pedal is pressed. It is a replacement part sold under part number J5352620.
Crown Automotive makes replacement parts for Jeep vehicles. This switch is universal fit and is not matched to a specific year, make, model or trim. Check the switch location and connector on your own vehicle.
Key features
- Completes the circuit to the rear brake lights when the pedal is depressed
- Replacement brake light switch
- Part number J5352620
- Universal fit
How brake switches work
The brake light switch is a simple contact that closes when the pedal moves, sending power to the rear lamps. Because it is a switch rather than a sensor, a failure usually shows as lights that stay on, lights that stay off, or intermittent brake lights. Switch location differs between Jeep generations and pedal designs, so the mounting bracket and plunger position matter as much as the electrical connection.
When replacing this type of switch, set the plunger correctly against the pedal arm, since a misadjusted switch can leave the lights on or make them flicker. Many people also check the brake bulbs and fuse during the same job. If the pedal feels different after the change, recheck the adjustment before driving. Keep the wiring clear of the pedal and firewall pass-through, and secure the connector so it cannot work loose.
- Test brake lights with a helper or a reflective surface
- Replace the switch if the pedal feels loose or sticky
- Recheck adjustment after any brake work
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J5352620 |
| UPC | 848399063011 |
| Function | Brake light switch for the rear brake lights |
Vehicle fitment
Fitment is universal and not tied to a specific Jeep. Brake light switches vary by application, so check the switch location on your vehicle.
Since no vehicles are named, no nearby models can be excluded. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the brake lights and pedal action after fitting the switch. Disconnect the battery before working on brake switch wiring.
What’s included
One brake light switch, part number J5352620. No mounting hardware or connector is named.
Not included: Any connector or harness your vehicle requires. Confirm which connector your brake switch uses before ordering.
















