Overview
The Crown Automotive 36364 is an axle shaft oil slinger for the front axle that works on either the driver or the passenger side. It installs on the stub shaft for the spindle seal.
A slinger throws oil and dirt away from the seal behind it, which helps the spindle seal last. It fits the 1980-1983 Jeep Cherokee (SJ), the 1977-1983 CJ5, the 1977-1986 CJ7, the 1980-1988 J10 and J20, and the 1981-1985 Scrambler.
Crown has made replacement Jeep parts for over 50 years and carries many factory-discontinued items. Confirm the size and material against the old slinger before installing.
Slingers on the stub shaft protect the spindle seal from dirt and oil, so owners replace them when rebuilding a front axle end. The same part works on either side, which keeps the parts list short.
The slinger works with the spindle seal, and both are usually replaced together when the axle end is serviced. The same part fits either side, so one slinger per side is needed.
Key features
- Axle shaft oil slinger
- Front axle, driver or passenger side
- Mounts on the stub shaft at the spindle seal
- Direct fit
- Covers six Jeep models
Spindle seal care
The spindle seal keeps lubricant in the hub and dirt out of the bearing area. A slinger adds a second barrier by throwing oil and grit off the stub shaft before they reach the seal lip. When the slinger is worn, grooved or loose, the seal takes more abuse and can start leaking sooner than expected.
During a front axle service, clean the stub shaft and look for grooves or rust where the slinger sits. Seat the new slinger squarely against its shoulder, then fit the seal and repack the bearings with fresh grease. Oil on the brake backing plate or a grease ring around the rotor are common signs that the seal is failing.
- Check the stub shaft for grooves or rust
- Seat the slinger squarely against its shoulder
- Replace the seal and slinger together
- Look for oil on the brake backing plate
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 36364 |
| UPC | 849603002635 |
| Product type | Axle shaft oil slinger |
| Position | Front, driver or passenger side |
| Mounting location | Stub shaft, at the spindle seal |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Crown Automotive 36364 includes: 1980–1983 Jeep Cherokee (SJ) (Base, Chief, Pioneer, Wide Track); 1977–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade); 1977–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade); 1980–1988 Jeep J10 (Base); 1980–1988 Jeep J20 (Base); 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR).
It fits the SJ Cherokee, CJ5, CJ7, J10, J20 and Scrambler. The XJ Cherokee and the Wrangler models fall outside its fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The slinger fits on the stub shaft, so the spindle must come apart for this repair. Seat it squarely against its shoulder so it spins true.
What’s included
- One axle shaft oil slinger, part number 36364









