Overview
The Corbeau Ford seat bracket with slider, part number CBUD1012, is a powder coated bracket for mounting a Corbeau seat in 1993-1995 Ford trucks and SUVs. It fits the Bronco, Explorer and Explorer Sport, F-150 and F-150 Lightning, F-250, F-350 and Ranger models of those years, so it suits owners who want a sliding bracket for a Corbeau seat.
The bracket has a black wrinkle powder coat finish and comes with a single locking slider as standard. It bolts in directly with little to no modifications. A double locking slider is an option and is the better choice for high stress driving.
Key features
- Powder coated black wrinkle finish
- Single locking slider standard, with a handle on the locking side
- Double locking slider option, operated by a connecting bar
- Direct bolt installation with little to no modifications
- Slider moves the seat forward and back
Slider choice and installation
Slider brackets come in single and double locking designs. A single locking slider uses one handle to release the seat, which suits casual driving. A double locking slider joins two sliders with a connecting bar, which spreads the load and holds the seat more firmly under hard use.
Powder coated finishes resist chips and scratches better than bare steel, but chips can still expose metal. Touch up any damage with a suitable coating before rust starts, especially where the bracket meets bolts or the floor.
Before installing, confirm the bolt pattern lines up with the floor mounts and that the seat clears the dash and pedals through its full slide range. Tighten all fasteners to the specified torque for your hardware, and recheck them after a few drives.
- Choose single locking for light use
- Pick double locking for high stress driving
- Check pedal and dash clearance at full travel
- Touch up coating chips promptly
Specifications
| Brand | Corbeau |
|---|---|
| Part number | CBUD1012 |
| Product type | Seat bracket with slider |
| Finish | Powder coated black wrinkle |
| Sliders | Single locking standard; double locking option |
| Installation | Direct bolt, little to no modifications |
| Fitment type | Direct Fit |
Vehicle fitment
It fits 1993-1995 Ford Bronco, Explorer, Explorer Sport, F-150, F-150 Lightning, F-250, F-350 and Ranger models. Other model years, including 1992 and earlier and 1996 and later, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Other model years, including 1992 and earlier and 1996 and later, are not on this list. The bullets also name 93-95 Ford Crew Cab Pickup, which does not match the model names in the manufacturer list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bracket bolts in directly with little to no modifications. On a single locking slider, pull outward on the handle at the locking side and slide the seat. On a double locking slider, lift the bar joining the two sliders to move the seat.
What’s included
One bracket with slider. The single locking slider is standard; the double locking option is a separate choice.
Not included: The seat is not part of this bracket.









