Overview
The Corbeau Baja XRS Seat (Black), part number 96602BPR, is a black vinyl/cloth reclining suspension seat sold as a pair. It is a direct bolt-in for CJ and YJ Jeeps and fits other vehicles with Corbeau custom brackets. The seat was shaped by an advertising campaign that asked enthusiasts to help design the ultimate reclining suspension seat.
Cut foam softens and wears out over a short period in many suspension seats. The Baja XRS uses injection molded memory foam paired with Corbeau’s suspension technology, which offers comfort and support over the long term. The seat also adds some style to a segment where most reclining suspension seats look alike.
Key features
- Injection molded memory foam paired with suspension technology
- Full body support
- Powder coated steel frame
- Black vinyl/cloth upholstery
- Harness capability for 3, 4 or 5 point harnesses
- Fits up to a 42 inch waist and still suits smaller drivers
- Reclining design, sold as a pair
Things to check
Before installing a suspension seat, look at the mounting hardware and the floor or bracket surfaces it will bolt to. Corrosion, stretched holes or cracked welds weaken the connection, and a seat that moves under load can stress the frame. Confirm that the bracket set is complete and that the fasteners match the threads in the vehicle. Grade and length of bolts are easy to overlook, so set them aside by size before you begin.
Once the seat is in place, run the recline through its full range with nobody seated and then with a helper, to check for contact with the roll bar, door, or cargo area. Adjust the seat position, then tighten all fasteners and recheck them after the first few drives. Cleaning the vinyl/cloth with a mild soap and water helps keep the finish from drying out, and it is wise to inspect the stitching and foam cushion periodically for wear.
Specifications
| Brand | Corbeau |
|---|---|
| Part number | 96602BPR |
| UPC | 700006162756 |
| Seat type | Reclining suspension seat |
| Seat location | Front |
| Color | Black |
| Upholstery | Black vinyl/cloth |
| Foam | Injection molded memory foam |
| Frame | Powder coated steel |
| Harness capability | 3, 4 or 5 point |
| Waist fit | Up to 42 inch |
| Quantity | Sold as a pair |
Vehicle fitment
It is a direct bolt-in fit for 1976 to 1995 YJ Wrangler and CJ models. The fitment covers the Jeep Wrangler YJ for 1987 to 1995, which is the production span of that generation. It also fits any other vehicle that uses Corbeau custom brackets.
Wrangler TJ, LJ and JK models are outside this fit, and CJ models are covered only through the 1976 to 1995 range. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The seat may need additional mounting brackets depending on your application. Because of its width, it cannot recline all the way back when installed in a Jeep, and it will hit the roll bar if reclined fully. Test recline clearance before relying on the seat.
What’s included
The seats are sold as a pair.
Not included: Additional mounting brackets, which may be required for your application.


















