Overview
The Corbeau Baja XRS Seat (Black), part number 96601PR, is a reclining suspension seat with injection molded memory foam. It is sold as a pair and is a direct bolt-in for CJ and YJ Jeeps. Corbeau developed the Baja XRS with input from enthusiasts and combines years of aftermarket seating experience with those designs.
Many suspension seats use cut foam that softens and wears over a short period, which leaves the driver’s back and legs unsupported. The Baja XRS uses injection molded memory foam combined with suspension technology, offering comfort and support over the long term. It is made for Jeep, truck and off-road drivers, and it can be installed in other vehicles with Corbeau custom brackets.
Key features
- Injection molded memory foam combined with suspension technology
- Full body support
- Powder coated steel frame
- Black vinyl upholstery, with a black vinyl/cloth option available
- Harness capability for 3, 4 or 5 point harnesses
- Reclining design with a fit for drivers up to a 42 inch waist, while still fitting smaller drivers comfortably
- Sold as a pair
Before you buy
A suspension seat works by letting the seat base and back move under the driver, so the seat’s travel matters as much as its padding. Foam density and frame strength decide how the seat handles repeated bumps over a long trail day. Drivers of different sizes feel the seat differently, so sit in a comparable seat if you can before buying. Think about harness placement too, since the seat mounts and the belts need to work together to hold the driver in place.
Installation depends on the vehicle. Check the seat’s mounting points, the floor or roll bar clearance and the recline range before you tighten anything. Padding and foam tend to flatten with heavy use, so inspect the cushion and the suspension travel periodically. Harness anchors should be checked after the first few drives and whenever the seat is moved. Keep the seat dry and clean, and avoid heavy cleaners on the vinyl to protect the finish.
Specifications
| Brand | Corbeau |
|---|---|
| Part number | 96601PR |
| UPC | 70000616274 |
| Seat type | Reclining suspension seat |
| Seat location | Front |
| Color | Black |
| Upholstery | Black vinyl |
| Foam | Injection molded memory foam |
| Frame | Powder coated steel |
| Harness capability | 3, 4 or 5 point |
| Waist fit | Up to 42 inch |
| Quantity | Sold as a pair |
Vehicle fitment
It is a direct bolt-in fit for 1976 to 1995 YJ Wrangler and CJ models. The fitment covers the Jeep Wrangler YJ for 1987 to 1995, the years that generation was built. It also fits other vehicles when Corbeau custom brackets are used.
Wrangler TJ, LJ and JK models are outside this fit, and CJ models outside the 1976 to 1995 range are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The seat may require additional mounting brackets for your application, so check bracket needs before starting the installation. Because of its width, the seat cannot recline all the way back when installed in a Jeep, and it will contact the roll bar if reclined fully. Secure the seat and harness anchors firmly before driving.
What’s included
The seats are sold as a pair.
Not included: Additional mounting brackets, which may be needed for your application, and Corbeau custom brackets required for vehicles other than CJ and YJ Jeeps.


























