Overview
The Corbeau Baja JP Seat (Black), part number 26402BPR, is a stationary highback front seat in black vinyl/cloth, sold as a pair. It is a copy of the Baja SS seat with a flat mounting surface on the bottom, a different stitch pattern and two harness slots in the back. Baja adapters are not needed on a flat surface or with Corbeau brackets.
It is a direct bolt-in to most CJ5 models, all CJ7 models and all YJ models. It also fits other vehicles with Corbeau Custom Brackets. The factory CJ brackets have a steep angle, and bolting to them can recline the seat to an extreme position. It fits up to a 38 inch waist line.
Key features
- Flat mounting surface on the bottom
- Two harness slots in the back
- Lowered bolsters that hold you in place but allow easy entry and exit
- Stationary highback design
- Bolts onto factory slider or seat bracket with no adapter
- Black vinyl/cloth upholstery
Fitting a stationary seat
A stationary highback seat stays in one recline position, so the mounting angle decides how upright the driver sits. Factory brackets can tilt a seat back farther than intended, which is why many owners check the angle before tightening anything. Sit in the seat with the vehicle parked and set the mounting before the bolts are fully torqued. If the backrest feels too far back, a shim or a set of aftermarket brackets can bring it upright.
Harness slots add flexibility for belts but also need care. Route each belt through the slot so it lies flat and does not pinch the seat edge. Inspect the slots and the stitching around them after heavy use, since repeated tension can wear the fabric. Keep the vinyl/cloth surface clean with mild soap, and dry it thoroughly to protect the seam.
Specifications
| Brand | Corbeau |
|---|---|
| Part number | 26402BPR |
| UPC | 70000617747 |
| Seat type | Stationary highback |
| Seat location | Front |
| Color | Black |
| Upholstery | Black vinyl/cloth |
| Harness slots | Two in the back |
| Waist fit | Up to 38 inch |
| Mounting | Factory slider/seat bracket, no adapter required |
| Quantity | Sold as a pair |
Vehicle fitment
This seat has a universal fit and is built around CJ and YJ Jeep mounting. Confirm the exact year and model before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Corbeau recommends its mounting brackets if the factory CJ bracket angle leaves the seat too reclined. Check recline clearance with the seat installed before using it.
What’s included
The seats are sold as a pair.
Not included: Corbeau custom brackets, needed for vehicles other than CJ and YJ models.
















