Overview
The Corbeau Trailcat seats are a pair of black vinyl reclining front seats, part number 44901BPR, sold together as a set of two. They are designed for a wide range of vehicles, including lifted Jeeps, with low thigh bolsters that ease entry and exit. The seat fits up to a 38-40 inch waist.
The Trailcat pairs those low thigh bolsters with kidney bolsters that are firm enough to hold the driver in place and limit body shifting while driving. Corbeau says its injection molded foam and strategically placed bolsters make the seat comfortable over long drives, and the seat has harness belt capability. Two stitch patterns are offered, including a diamond stitch, and this black version comes with black stitching.
Key features
- Sold as a pair of seats
- Low thigh bolsters for easier entry and exit on lifted vehicles
- Kidney bolsters that help hold the driver in place
- Injection molded foam with strategically placed bolsters
- Diamond stitch pattern with black stitching
- Harness belt capability
- Black vinyl upholstery
Choosing a seat bracket
Because this seat is sold without a bracket, the bracket is the part that decides how the seat sits and how securely it is anchored. A good match lines up the seat’s mounting holes with the vehicle’s floor or seat rail points, keeps the seat level, and leaves room for the seat to slide and lock properly. Mismatched brackets can tilt the seat or leave it loose.
Measure the mounting points before buying a bracket and confirm the bracket material and hardware are rated for the load. Use all of the mounting holes the bracket provides. Lifted vehicles can change seat height and angle, so check seat position after any suspension or body changes. Harness belts should only be used with anchors that are part of the vehicle structure.
- Confirm bracket and floor point alignment before tightening
- Recheck mounting bolts after the first few drives
Specifications
| Brand | Corbeau |
|---|---|
| Part number | 44901BPR |
| UPC | 700008347961 |
| Upholstery | Black vinyl |
| Stitch pattern | Diamond, black stitching |
| Foam | Injection molded |
| Seat location | Front |
| Seat type | Reclining |
| Waist fit | Up to 38-40 inch waist |
| Sold as | Pair |
| Seat bracket | Sold separately |
Vehicle fitment
The Trailcat is a universal fit seat, not built for a specific year, make or model. Mounting is the main thing to check, since the seat bracket is sold separately and the bracket you need depends on your floor and seat rail layout.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The seat bracket is not included, so plan to source a bracket that matches your vehicle’s mounting points before the seat goes in. Harness belt capability requires the harness to be anchored to the vehicle’s own mounting points, and a qualified installer should confirm those anchors before use.
What’s included
Two Trailcat seats, sold as a pair, in black vinyl with diamond stitching.
Not included: Seat bracket, which is sold separately.
















