Overview
The Pro Comp center cap is a gloss black cap with a 3.30 inch bore and a Pro Comp logo in the center. It fits wheels with 5×4.5, 5×5 and 6×4.5 bolt patterns.
Confirm the cap by its bore and bolt pattern before ordering, since the name gives no part number. No vehicle is named. Measure your wheel’s center bore and bolt pattern before buying.
Key features
- Gloss black finish
- 3.30 inch bore
- Pro Comp logo in the center
- Bolt patterns 5×4.5, 5×5 and 6×4.5
Gloss finishes and daily use
A gloss black center cap sits in the middle of the wheel where it is seen every time the vehicle is parked. Gloss finishes reflect light well, but they show fingerprints, road spray and small scratches more readily than matte surfaces. Wipe the cap with a soft cloth during regular washing to keep the surface clear.
Center caps also protect the hub from water and grit. A cap that has been struck by a stone or pressed in unevenly may crack along the edge, which lets moisture reach the hub. Check the cap for chips and seating each time the tire is rotated, and replace it if it no longer sits flush.
- Wash with mild soap and a soft cloth
- Avoid abrasive pads on gloss surfaces
- Check the edge for chips after rough driving
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| UPC | 844658031470 |
| Type | Center cap |
| Finish | Gloss black |
| Center bore | 3.30 in |
| Bolt patterns | 5×4.5, 5×5 and 6×4.5 |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Check the bore and bolt pattern on your wheels first.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One gloss black center cap with the Pro Comp logo.









