Overview
The California Super Trucks CSR-6521B is a front 2.0 reservoir shock absorber, part number CSR-6521B, for 2011–2018 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD trucks. Two are needed, and it is used with companion part CSS-C33-R.
This gas charged reservoir shock fits a 6 to 8 in. lift range. It uses bushing mounts rather than heim joints.
Key features
- Front-position 2.0 reservoir shock
- Gas charged
- Two required per vehicle
- Bushing mounts, not heim joints
- Suits a 6 to 8 in. lift range
Planning the front upgrade
A reservoir shock places the gas and oil in a separate chamber, which gives the damper more room to work under heavy use. On a heavy duty truck, that extra capacity can help during long grades or repeated rough driving. The shock must still fit the mounting space and the lift height, so measure the area before ordering.
Bushing mounts avoid the heim joints that some front ends use, which can make the install simpler and quieter. Bushings do wear, though, so check them for cracking, compression and movement during routine service. Keep the alignment in mind as well, since a change in ride height can shift the front geometry.
Inspect the reservoir hose or line for rubbing, check the mounts for looseness, and look for oil on the body after rough trail work. Replacing worn bump stops and checking the steering components at the same time helps the new shocks perform as expected.
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSR-6521B |
| UPC | 700007538671 |
| Position | Front |
| Type | 2.0 reservoir shock |
| Hydraulic / gas charged | Gas charged |
| Lift range | 6 to 8 in. |
| Quantity required | 2 |
| Companion part | CSS-C33-R |
| Mounting | Bushings |
Vehicle fitment
Fits 2011–2018 Chevrolet Silverado 2500 HD and 3500 HD trucks, plus GMC Sierra 2500 HD and 3500 HD trucks.
Other models, including non-HD trucks, are outside this fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Two are required, so both front positions need a shock. Mount the bushing-style unit without pressing out factory heim joints, and support the truck before removing anything.
What’s included
All required hardware is included with the shock.
Not included: Not included: companion part CSS-C33-R, which is used with this shock.









