Overview
The B&W HDRH25601 is a Class 5 heavy-duty rear receiver hitch for 2011–2019 Chevrolet Silverado 2500 HD and 3500 HD and GMC Sierra 2500 HD and 3500 HD trucks. It has a 2 Inches X 2 Inches receiver and a Class V weight class, and the trims covered are named in the fitment section below.
It has a 2-inch opening that takes standard 2-inch shank accessories, such as ball mounts and cargo carriers. Use the truck’s own towing and payload ratings to set what can be pulled.
The receiver is built to resist rust and wear. Check the truck’s towing and payload limits before connecting a trailer.
Key features
- Class 5 heavy-duty receiver hitch
- Class V weight class
- Rear mounting position
- 2 Inches X 2 Inches receiver opening
- Direct fit for the listed trucks.
- Black finish
- Built to resist rust and wear.
Before you buy
A receiver hitch is the connection point between the truck and any trailer or cargo carrier, so the receiver rating is only one part of the setup. The truck’s frame, rear bumper, brake system and cooling capacity all limit what it can tow safely. Before buying, compare the trailer weight you plan to pull with the truck’s towing and payload ratings, which are found in the owner’s manual for that specific truck.
Heavy-duty trucks often need accessories for heavier loads. A weight-distribution system, a sway control unit or a brake controller may be needed, and each one attaches to the receiver or the truck’s wiring. Consider which accessories you will run before choosing a shank size and its rise or drop, since those set the height the trailer sits at.
- Trailer weight and tongue weight for the load you plan to tow
- Weight-distribution or sway control needs
- Ball mount rise and drop for level towing
- Brake controller wiring on the truck
Specifications
| Brand | B&W Hitch |
|---|---|
| Part number | HDRH25601, also sold as BNWHDRH25601 |
| Hitch class | Class 5 heavy-duty |
| Weight class | Class V |
| Mounting | Rear |
| Receiver size | 2 Inches X 2 Inches |
| Fitment type | Direct Fit |
| Finish | Black |
Vehicle fitment
It fits 2011–2019 Chevrolet Silverado 2500 HD and 3500 HD trucks in the High Country, LT, LTZ and WT trims. It also fits 2011–2019 GMC Sierra 2500 HD and 3500 HD trucks in the Base, Denali, SLE, SLT and WT trims.
Silverado and Sierra 1500 models and 2020 and newer HD trucks are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test-fit your ball mount or accessory shank in the 2 Inches X 2 Inches opening before towing. Because the receiver is rear-mounted and Class V rated, confirm the truck’s towing and payload limits before connecting a trailer.
What’s included
Check the package contents against your installation before starting.








