Overview
The B&W Hitch Heavy Duty Receiver Hitch, part number HDRH25122, is a rear receiver hitch with a 2-inch by 2-inch receiver and a Class V weight class. It is a direct fit hitch. Confirm fit for your vehicle’s year, model and trim before selecting it.
The hitch is made with modern manufacturing methods. Check the rated loads against your trailer before towing.
Key features
- Rear mount receiver hitch
- 2-inch by 2-inch receiver opening
- Class V weight class
- Direct fit type
- Roll pan fit does not apply to this hitch.
Choosing a Class V receiver
A Class V receiver is intended for heavier towing than lighter hitch classes, so the trailer, load and tow vehicle all need to be matched. Gross trailer weight and tongue weight are the numbers to compare, and the lower limit in the setup governs.
Receiver size matters for accessories. A 2-inch by 2-inch opening takes many common ball mounts, cargo carriers and bike racks, but the pin must fit the receiver’s hole. Hitches carry the load through the frame, so check the mounting bolts, the receiver tube and the welds on a regular schedule. Re-tighten fasteners after the first tows, and replace any receiver with visible damage before towing again.
- Confirm the ball mount shank matches the receiver
- Use a pin and clip rated for the load
- Check the hitch for cracks around the welds
Specifications
| Brand | B&W Hitch |
|---|---|
| Part number | HDRH25122 |
| UPC | 843233000764 |
| Mounting position | Rear |
| Receiver size | 2 in x 2 in |
| Weight class | Class V |
| Fitment type | Direct fit |
| Roll pan fit | Not applicable (N/A) |
Vehicle fitment
No vehicle years, makes or models are named for this hitch. The only fitment information given is the direct fit type.
Confirm your vehicle’s year, model and trim before ordering.









