Overview
The Bushwacker Pocket Style rear fender flare pair, part 10078-02, is made for the rear of the Jeep Wrangler JK. It adds up to 4.75 inches of tire coverage from debris and is designed to complement oversized tires and high-clearance lift kits. The pair fits the 2007 to 2018 Jeep Wrangler JK.
The rear pair uses recessed stainless steel bolts in a pocket design that is a Bushwacker original. The flares are made in the USA from thick Dura-Flex 2000 TPO, which is 100% UV protected so the finish will not chalk. The OE textured black finish has an aftermarket style and can be painted to suit the body.
Key features
- Pocket style rear flares with recessed stainless steel bolts
- Adds up to 4.75 inches of tire coverage from debris
- Designed to look good with all wheel and tire packages
- 100% UV protected Dura-Flex 2000 that will not chalk
- OE textured black finish that can be painted
- Installs with no body-side drilling required
Rear tire clearance basics
A rear flare covers the tire from the back of the wheel opening, and the tire’s position changes as the rear axle moves. On a Wrangler JK, the most useful check is at full suspension travel, when the tire climbs highest into the flare.
Larger rear tires need more room in the same space, so the spare tire carrier, rear bumper and brake lines all deserve a look once the wheel and tire combination changes. Plan the layout before mounting the flares to avoid rework.
Rear pocket flares rarely need attention between trips, but a quick look helps. Check the stainless bolts for tightness after rough trail use, and rinse mud from the inner edge so grit does not wear the finish or the tire sidewall.
- Check clearance at full suspension travel
- Inspect the spare tire carrier with larger tires
- Tighten stainless bolts after rough trips
- Rinse mud from the inner edge
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 10078-02 |
| UPC | 90689117328 |
| Position | Rear |
| Quantity | Pair |
| Tire coverage | Up to 4.75 inches from debris |
| Material | Dura-Flex 2000 |
| Finish | OE textured black, paintable |
| Width | Stock width |
| Front pair part number | 10077-02 |
Vehicle fitment
This rear pair is for the 2007 to 2018 Jeep Wrangler JK, covered by the JK chassis code.
The JK generation is the only range covered, so the Wrangler TJ, YJ and JL are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The pair installs with no body-side drilling required. Fit the rear flares first, check their position against the tires, and then confirm the clearance at full suspension travel.
What’s included
A pair of rear Pocket Style flares. The front pair is part 10077-02.


















