Overview
The Bushwacker 40116-02 is a pair of pocket style rear fender flares for the Chevrolet Silverado. The flares add 1.75 inches of width and tire coverage at the rear and are meant for oversized tires and high-clearance lift kits. They fit the 2014 to 2018 Silverado 1500 and the 2015 to 2018 Silverado 2500 HD and 3500 HD in the trims named for each.
The recessed stainless steel bolts hold the flares in place, and the surface is Dura-Flex 2000 made in the USA. The OEM-style matte black finish is UV protected and resists chalking. The install needs no drilling, and the finish can be painted to match or accent the body color.
Key features
- Pocket style design for the rear position
- 1.75 inches of width and tire coverage
- Recessed stainless steel bolts
- No drilling required for installation.
- 100 percent UV protected Dura-Flex 2000
- OEM-style matte black finish that is easy to paint
Rear pocket flare clearance
Rear flares are often the first place a larger tire shows contact, especially on a loaded truck. The rear edge should stay clear of the tire at full compression, when the suspension is loaded and the wheel moves up into the opening. Test-fit the flare with the truck at its normal load, not empty in the driveway.
Pocket style flares rely on recessed bolts, so the mounting area is firm but the plastic edge can still flex. Keep the hardware snug in a cross pattern and avoid forcing the flare into place. A flare that is pulled against an uneven fender can warp or crack over time.
Lift height and tire width change the answer, so recheck clearance after any suspension or tire change. A small adjustment early is much easier than repairing a split edge later.
- Test-fit with normal payload
- Check clearance after tire changes
- Keep the mounting area clean
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 40116-02 |
| UPC | 90689116871 |
| Position | Rear |
| Width and tire coverage | 1.75 inches |
| Quantity | Sold as a pair |
| Fit type | Direct fit |
| Material | Dura-Flex 2000 |
| Finish | OEM matte black, paintable |
| Model years | 2014 to 2018 Silverado 1500; 2015 to 2018 Silverado 2500 HD and 3500 HD |
Vehicle fitment
The 2014 to 2018 Chevrolet Silverado 1500 fits in the Custom, High Country, LS, LT, LTZ, SSV and WT versions. The 2015 to 2018 Silverado 2500 HD and 3500 HD fit in the High Country, LT, LTZ and WT versions. Earlier Silverado years and 2019 and later are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The install needs no drilling, and the recessed bolts mount the rear pair in place. The front pair is part 40119-02 and the full set is part 40957-02, both sold separately.
What’s included
A pair of pocket style rear fender flares.
Not included: the front pair (part 40119-02) and the full set (part 40957-02) are sold under separate part numbers.









