Overview
The Bushwacker 40004-11 is a pair of cut-out rear fender flares for Chevrolet and GMC trucks built for serious off-road use. The flares free more wheel travel and keep tire coverage adequate for larger tires. The cut-out approach removes some body sheet metal, so the flares suit owners who plan to modify the rear fenders.
The flares are made from Dura-Flex 2000, which Bushwacker calls its own material, with UV protection that guards against chalking. The finish is an OEM matte black that works as-is or can be custom painted. The coverage width is 2.5 inches, and the flares are sold as a pair.
The cut-out rear flare is rated for 2.5 inches of width and coverage. The front pair carries part numbers 40003-11 and 40019-11, so confirm which one matches your kit before ordering the set.
Key features
- Cut-out rear flare for maximum wheel articulation
- Dura-Flex 2000 material with UV protection
- Pro-grade matte black finish, paintable
- 2.5 inches of width and coverage
- Sold as a pair
- Made in the USA with a limited lifetime warranty
Sealing and finishing rear cut-outs
Rear cut-out flares leave an open edge in the rear fender, so finishing that edge is part of the installation. Smooth any burrs, prime the bare metal and fill gaps where water could sit. A paint match is easier when the primer and topcoat are applied in thin coats that follow the body curve.
The rear flare works best when the trimmed opening is checked against the planned tire and suspension. Rear articulation can change when a taller tire or added accessory is fitted, so recheck clearance at full droop and full compression. Keeping the rear wheel well clear of debris also helps the cut edge stay sound.
- Smooth and prime the cut edge
- Seal gaps where water can collect
- Recheck clearance after accessory changes
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 40004-11 |
| Position | Rear |
| Quantity | Pair |
| Width and coverage | 2.5 inches |
| Installation | Requires cutting body sheet metal |
| Material | Dura-Flex 2000 |
| Warranty | Limited lifetime |
| UPC | 90689103352 |
Vehicle fitment
The flare is made for Chevrolet and GMC trucks as a general fit, with no model year or chassis code tied to it. Confirm the year, model and trim of your truck before ordering.
Check the rear wheel opening and the planned tire size before cutting. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because these flares are cut-out designs, the rear fender sheet metal must be cut for the flare to work at full articulation. Follow the installation guide for your model, and check clearance before finishing the work.
What’s included
One pair of rear cut-out flares. The front pair is part 40003-11.









