Overview
The Bushwacker Ford Extend-A-Fender Flare Set, part number 20903-01, is a set of four paintable flares covering the front and rear of a Ford with oversize wheels and tires. Check fit against your vehicle’s year, model and trim before ordering.
Extend-A-Fender flares add coverage over larger tires. They are molded from Dura-Flex 2000 with built-in UV protection. The smooth OEM-style matte black finish resists chalking, cracking and warping.
The set has 1.75 inches of width and coverage. The finish is easy to paint for a custom look, and the flares install in minutes with only minimal drilling.
The 1.75-inch figure applies to the set as a whole, so compare it with the tire width you plan to run.
Key features
- Four flares in front and rear pairs
- 1.75 inches of width/coverage
- Minimal drilling required for mounting
- Dura-Flex 2000 material with built-in UV protection
- Resists chalking, cracking and warping, per the manufacturer
- Smooth OEM-style matte black finish, paintable
- Made in the USA
Front and rear positions
A four-flare set covers both ends of the truck, so the front and rear pairs can be fitted at different times or matched to different tire sizes. The front flares sit ahead of the wheel and the rear flares sit behind it, so the clearance check differs at each end. Start with the position that has the tightest space, usually the front, and confirm clearance there before mounting the rear.
Planning should include the spare tire, the bumper mounts, and any running boards that may sit close to a flare. Painting the flares before mounting is easier on a bench, where the edges are simpler to reach. Inspect the edges and fasteners after rough trail use, and keep touch-up paint on hand for any chips that appear after installation.
- Test-fit the front pair first
- Check spare tire and bumper clearance
- Keep matching touch-up paint on hand
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 20903-01 |
| UPC | 90689104205 |
| Quantity | Set of 4 |
| Position | Front and rear |
| Width/coverage | 1.75 in |
| Material | Dura-Flex 2000 |
| Finish | OEM-style matte black, smooth, paintable |
| Front pair part number | 20015-01 |
| Rear pair part number | 20016-01 |
Vehicle fitment
This set is made for a Ford with oversize wheels and tires. Fitment depends on the model year and chassis, so the year must be matched to your truck.
Match your truck’s year, model and trim to the set before fitting any flare in it.
Installation notes
Installation takes minutes, but the flares need minimal drilling, so check the mounting points before drilling any holes in the body.
What’s included
A set of four Extend-A-Fender flares, with front and rear pairs.









