Overview
The Bushwacker fender gimp, part number B/W000040-01, is a rubber gasket strip that fits between the fender flare and the body. It is a universal fit, so it is not built for one model year. One 30 ft. section covers one set of fender flares.
Fender gimps are trim pieces used at the seam where a flare meets the body. This version is a rubber gasket, which fills the seam between flare and body.
Key features
- Rubber gasket strip for the flare-to-body seam
- One 30 ft. section covers one set of fender flares
- Universal fit
- Bushwacker part number B/W000040-01 with UPC 9068900001
Seam fit and flare trim
Fender flare trim sits where the flare meets the painted body panel, and that seam collects road grit and water over time. A rubber gasket strip fills the gap and gives the flare a finished edge. Because seam length changes with the vehicle and the flare design, measuring the seam before cutting avoids waste and short sections.
Rubber trim can soften in heat and curl at the ends when left in the sun, so store unused lengths flat and out of direct light. Clean the seam and the trim surface before pressing the strip in, and use a small amount of trim adhesive only where the strip needs it. Check the trim after the first few washes to see whether it has moved or lifted at the corners.
- Measure the total seam length first
- Clean both surfaces before fitting
- Store spare rubber lengths out of direct sun
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | B/W000040-01 |
| UPC | 9068900001 |
| Type | Fender flare trim (fender gimp) |
| Material | Rubber gasket strip |
| Coverage | One 30 ft. section per set of fender flares |
| Fitment | Universal Fit |
Vehicle fitment
It is a universal fit, so check that the 30 ft. length suits your flare set and body seam before installing.
Universal fit does not confirm a match for every flare or body style. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One 30 ft. section covers one set of fender flares, so count the seam length on each side before cutting.









