Overview
The Bushwacker 50047-02 is a pocket style front fender flare pair for the Dodge Ram. The flares are shaped to complement oversized tires and high-clearance lift kits, and they add up to 2.50 in. of tire coverage from debris. Confirm fit for your truck’s year and model before ordering.
Recessed stainless steel bolts hold the flares on, and they mount with no drilling. The OEM-style matte black finish is UV protected so it resists chalking, and the flares can be painted to match the body. The Dura-Flex 2000 material is made in the USA and is warp-resistant.
The pocket design holds each flare with recessed bolts. The rear pair is 50038-02, and the full set is 50919-02 for a matching front and rear look. The flares are UV protected and can be painted.
Key features
- Adds up to 2.50 in. of tire coverage against debris
- Recessed stainless steel bolts for the pocket style look
- Mounts right out of the box with no drilling
- OEM-style matte black finish that paints easily
- Dura-Flex 2000 material, 100% UV protected
- Made in the USA, with a Limited Lifetime Warranty
Front flares and steering
Front fender flares affect steering clearance more than rear flares do, because the tire turns inside the front wheel well. When the wheels are at full lock, the tire can contact the flare edge, the inner fender or the bumper. Turn the steering slowly from lock to lock after installation and watch each side for contact, adjusting the flare position if needed.
Front flares also sit close to the headlights, winch mounts and bumper brackets on many trucks, so plan the installation around any accessories already fitted. Keep the mounting bolts snug after the first few drives, since a pocket style flare can shift slightly when the truck flexes on rough ground.
- Check steering clearance at full lock on both sides
- Plan around headlights, winch and bumper brackets
- Retorque mounting bolts after the first few drives
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 50047-02 |
| UPC | 90689112545 |
| Vehicle | Dodge Ram (model years not stated) |
| Position | Front |
| Sold as | Pair |
| Rear pair part number | 50038-02 |
| Set part number | 50919-02 |
| Tire coverage | Up to 2.50 in. |
| Style | Pocket, with recessed stainless steel bolts |
| Finish | OEM matte black, smooth, paintable |
| Material | Dura-Flex 2000, 100% UV protected |
| Installation | No drilling required |
| Warranty | Limited Lifetime |
| Made in | USA |
Vehicle fitment
Match the flares to your truck’s year, model and trim before fitting, so the front edge sits correctly against the fender.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A front pair of pocket style flares with the recessed stainless steel bolts. The rear pair and full set are sold under the part numbers listed above.









