Overview
The Bushwacker OE Style color matching fender flare set, part 50917-35, is a front and rear set of four flares for the Dodge Ram in the Black Clear Coat finish. The flares allow more tire coverage and more clearance for trucks and SUVs while protecting the body from dirt and debris. The set adds up to half an inch of tire coverage from debris.
The flares come pre-finished to match the paint on the truck, so there is no waiting on paint before installation. The edge trim and stainless steel hardware are already installed, which Bushwacker says gives a quick install and a snug fit without drilling. The flares are made in the USA from Dura-Flex 2000, a warp-resistant material that Bushwacker tailors to each application.
Key features
- Pre-finished in Black Clear Coat, so no painting is needed
- Edge trim and stainless steel hardware pre-installed
- Up to half an inch of tire coverage from debris
- Installs with no drilling required
- 100% UV protected Dura-Flex 2000 that is warp-resistant
- Made in the USA and tailored to each application
Pre-finished flare care
Pre-finished flares arrive painted, so the job is mostly about matching the finish and fitting the flare well. Paint on a truck fades over time from sun and weather, and a new flare in a fresh color can look different in direct sun than in the shade. Compare the flare with the body in daylight before fitting anything else, and keep the color code on file so a touch-up or replacement can match later.
Good fitment matters most for a flare that will not be painted. Gaps along the body line are easiest to correct before the bolts are fully tightened, so start each bolt by hand and check the alignment. Wash the flares with mild soap and water and avoid strong solvents that can dull the finish over time.
- Check the color in daylight against the body
- Start every bolt by hand before tightening
- Keep the color code with the truck’s paperwork
- Clean with mild soap and water
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 50917-35 |
| UPC | 90689121622 |
| Position | Front and rear |
| Quantity | Set of 4 |
| Width and coverage | Half an inch |
| Finish | Black Clear Coat, pre-finished |
| Material | Dura-Flex 2000 |
| Hardware | Stainless steel, pre-installed with edge trim |
| Fitment type | Direct fit |
Vehicle fitment
The flares are sized for the Dodge Ram. Confirm your vehicle’s model year and body style before installing.
Because the flares are formed for each application, a Ram from a different year or body style may not line up with the factory body lines. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The edge trim and hardware come installed, so the work is mainly positioning the flares and checking the gap at the tire. Compare the Black Clear Coat finish with the truck’s paint before mounting, because the flares arrive finished.
What’s included
Four pre-finished OE Style flares, front and rear, with edge trim and stainless steel hardware already installed.














