Overview
The Bushwacker Dodge RAM Max Coverage Fender Flare Set in Black Clear Coat, model number 50915-35, is a paintable front and rear set of pocket-style flares. The black finish uses paint code PX8, and the set is listed with 3 inches of width/coverage.
The pocket style uses recessed stainless steel bolts. The flares are designed for the Dodge RAM to complement oversized tires and high-clearance lift kits.
The flares are made of Dura-Flex, which Bushwacker says is 100% UV protected. They install easily with no drilling required, and the set carries a limited lifetime warranty. The flares are made in the USA.
Key features
- Max coverage pocket-style design
- Black Clear Coat finish, paint code PX8
- Installs with no drilling
- 100% UV protected Dura-Flex material
- 3 inches of width/coverage
- Made in the USA with a limited lifetime warranty
Pocket style and tire clearance
Pocket-style flares sit over the tire with a recessed edge, which helps them cover wider tires and a raised suspension. When a lift or larger tire is added, check the clearance between the tire and the inner flare edge at full lock and at full suspension compression. Rubbing usually shows up at the top of the arch first.
Paint-matched finishes need care around the bolt heads, where the clear coat can chip if tightened with the wrong tool. Use a soft-jaw or hand tool and avoid overtightening the fasteners in the plastic. Washing the flare with mild soap helps keep UV-resistant finishes looking uniform.
Mud and salt can build up in the gap behind the flare, so rinse that area after muddy trips. Check the mounting points each season for loose fasteners, and replace any that show corrosion.
Specifications
| Brand | Bushwacker |
|---|---|
| Model number | 50915-35 (also written as B/W50915-35) |
| UPC | 90689118875 |
| Style | Max coverage, pocket style |
| Material | Dura-Flex, 100% UV protected |
| Finish | Black Clear Coat, paint code PX8; paintable |
| Quantity | Set of 4 |
| Position | Front and rear |
| Width/coverage | 3 inches |
| Origin | Made in the USA |
| Warranty | Limited lifetime |
| Fitment type | Direct fit, no drilling |
Vehicle fitment
The set is designed for the Dodge RAM. Check your truck’s model year before buying.
Compare the RAM model year to your truck before ordering, and verify the year, model and trim as well.
What’s included
A set of four max coverage pocket-style fender flares in Black Clear Coat.






















