Overview
The Bushwacker 40052-02 is a pair of cut-out rear fender flares for Chevrolet Silverado and GMC Sierra trucks. The rear cut-out is designed to maximize off-road wheel travel and maintain tire coverage for oversized tires. Because the design is cut out of the body, the rear sheet metal has to be trimmed during installation.
Bushwacker builds these flares from its Dura-Flex 2000 material, which it describes as warp-proof and engineered for durability and flexibility in severe conditions. The UV protection guards against chalking. The matte black finish is intended to be used as is or painted for a custom look. The coverage is rated at 2.75 inches.
The front pair is part 40051-02. The rear flare is rated for 2.75 inches of width and coverage, and the cut-out design lets the rear wheel travel further. The matte black finish can be used as is or custom painted.
Key features
- Cut-out rear flare for maximum wheel articulation
- 2.75 inches of width and coverage
- Warp-proof Dura-Flex 2000 construction
- UV protection against chalking
- Matte black finish, paintable
- Sold as a pair
Rear cut-out fitting and body care
Rear cut-out flares work on the same principle as the front pair, but the trim sits over the rear wheel where the body flexes under load. Before cutting, consider the rear bumper, the tailgate and any hitch or tow equipment that could interfere with the new edge. Measuring those points early avoids rework later.
After fitting, the rear edge needs regular attention. Mud and road grit can gather in the gap between the tire and the flare, so clean it after off-road use. Check the finish along the trimmed edge and touch up scratches. The rear articulation may change with a lift or larger tire, so recheck clearance whenever the setup changes.
- Check bumper and hitch clearance
- Clean grit from the tire gap
- Recheck clearance after setup changes
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 40052-02 |
| Position | Rear |
| Quantity | Pair |
| Width and coverage | 2.75 inches |
| Installation | Requires trimming body sheet metal |
| Material | Dura-Flex 2000 |
| UPC | 90689106438 |
Vehicle fitment
These rear flares are sold for Silverado and Sierra trucks as a general fit. Confirm the year, model and trim of your truck before ordering.
Check the rear wheel opening and tire size before trimming. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan the rear sheet metal trimming before starting and follow the installation steps for your model. The finish is paintable, so it can be matched to the truck after fitting.
What’s included
One pair of rear cut-out flares. The front pair is part 40051-02.








