Overview
The Bushwacker Ford OE Style Fender Flare Set, part number 20909-02, is a set of four flares for the 1999-2007 Ford F-250 Super Duty and F-350 Super Duty. It covers both the front and the rear, and it adds up to 1.50 inches of tire coverage from debris.
The OE Style flares are built to a fit and finish intended to exceed original equipment. They use Dura-Flex 2000, a thick, warp-proof material with 100% UV protection. The set is designed to look factory-installed, with a sporty blackout option.
The matte black finish is OEM style and can be left as it is or painted to match or accent the body color. The listed width/coverage is 1.5 inches.
The fit and finish are meant to look factory-installed, so the flares blend with the body lines. The front pair is part 20039-02 and the rear pair is part 20040-02, and the four flares are sold together as one set.
Dura-Flex 2000 is thick, warp-proof and UV protected, so the finish will not chalk and is meant to hold its look over time.
Key features
- Set of four flares for front and rear positions
- Adds up to 1.50 inches of tire coverage
- Installs in minutes with no drilling
- 100% UV protected Dura-Flex 2000 that will not chalk
- OEM matte black smooth finish that is easy to paint
Factory look and finish
Factory-style fender flares aim to match the lines of the body, so the main goal is a clean fit at each wheel opening. Front and rear flares must sit evenly with the body and the door gap, and the tire should sit inside the flare at normal ride height. Checking the fit with the truck parked on level ground before any hardware is fully tightened makes it easier to get the even look a factory fender gives.
After the first few drives, look for fresh scuffs at the flare edges, cracks near the fasteners, and paint lifting where the flare meets the body. Keep the surface clean with mild soap, since road grime and salt can dull even a matte finish. When painting to match the body, use a primer suited to flexible molded parts and apply thin coats so the flare keeps its natural flex.
- Set the front pair first, then align the rear
- Check the gap at the door and tire at ride height
- Wash off road salt to keep the finish even
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 20909-02 |
| UPC | 90689104991 |
| Quantity | Set of 4 |
| Position | Front and rear |
| Width/coverage | 1.5 in |
| Tire coverage | Up to 1.50 in |
| Material | Dura-Flex 2000 |
| Finish | OEM matte black, smooth, paintable |
| Front pair part number | 20039-02 |
| Rear pair part number | 20040-02 |
Vehicle fitment
It is made for the 1999-2007 Ford F-250 Super Duty and 1999-2007 Ford F-350 Super Duty, in the Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.
The list stops at 2007, so it does not cover the 2008 and later Super Duty trucks, and no F-150 is listed. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A set of four OE Style fender flares, front and rear.









