Overview
The Bilstein 5100 Series steering damper, part number 24-196284, is a stabilizer-only unit for the 2008–2016 Ford F-250 Super Duty and the 2008–2013 Ford F-350 Super Duty. It measures 19.13 inches collapsed and 27.44 inches extended, in both inches and millimeters.
The damper dampens small steering movements and reduces the steering vibration that builds up in older vehicles. Its finish is zinc plated, and it is a single unit rather than a dual setup.
Key features
- Single steering damper, stabilizer only
- Dampens small steering movements
- Reduces steering vibration in older vehicles, per the manufacturer
- Zinc plated finish
- Collapsed length 19.13 in (486.0 mm) and extended length 27.44 in (697.0 mm)
- Brackets and shock boot are not included.
Heavy-duty steering loads
Full-size trucks carry heavier front axles and steering loads than lighter vehicles, which means a steering damper works harder over rough ground and under towing. The damper’s role is to limit quick side-to-side movement of the front wheels, so the steering wheel responds more predictably when the tires hit ruts, rocks or uneven pavement.
Heavy-use vehicles benefit from regular inspection. Look at the mounts, boot and bushings at each service, and watch for changes in steering feel after a long tow or a heavy off-road trip. Tire wear, alignment changes and worn tie rod ends all raise the load on the damper, so address those items together. Tighten all mounting hardware to the specified torque and recheck after the first few trips.
- Inspect mounts at each service
- Watch for changes in steering feel after towing
- Keep tire pressure and alignment in check
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-196284 |
| UPC | 651860680569 |
| Series | 5100 Series |
| Type | Stabilizer only |
| Single / dual | Single |
| Collapsed length | 19.13 in (486.0 mm) |
| Extended length | 27.44 in (697.0 mm) |
| Finish | Zinc plated |
| Fitment | Direct Fit |
| Brackets included | Not included |
| Shock boot included | Not included |
Vehicle fitment
Covers the 2008–2016 Ford F-250 Super Duty (Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT) and the 2008–2013 Ford F-350 Super Duty (Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT).
The list does not include 2005–2007 or 2017 and later Super Duty trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the collapsed and extended lengths against your steering setup before installing, since the damper has to reach both ends of its range without binding. Support the vehicle securely before working near the steering linkage.
What’s included
One 5100 Series steering damper, stabilizer only.
Not included: brackets and shock boot.









