Overview
The BedRug Impact Mat IMQ15LBS is a padded truck bed mat built for the 2015-2018 Ford F-150 in the Lariat, SSV, XL and XLT trims. It suits pickups with a spray-in bed liner or no liner. It lays over the bed floor and ribs to give a flat, slip resistant surface for loading gear and kneeling. The padding and TPO top make it a cushioned option for working in the bed.
BedRug built the mat from a TPO composite top layer over a 3/4 inch padded under layer. The mat fastens with hook and loop strips, so installation does not involve sanding, prepping or drilling into the bed floor. A tailgate gap guard hinge bridges the seam between the bed piece and the tailgate piece, which helps keep debris from collecting in that gap.
Key features
- Flat TPO composite top surface that is slip and skid resistant
- 3/4 inch padded under layer for dent and impact resistance
- Integrated tailgate gap guard hinge covering the bed-to-tailgate seam
- Attaches with hook and loop fasteners and no drilling
- Bleach, battery acid, oil and gas wash off the surface
- Does not absorb water; water runs off through the zippered perimeter and factory bed drain holes
- Fade and UV resistant TPO material
Mat care after rough work
A bed mat takes the abuse of gravel, sand and construction materials, so it benefits from regular inspection. Dirt caught under the edges can grind against the bed floor, and a loose corner may catch on cargo. A quick check after each heavy load helps the mat stay flat and the fastening strips hold.
If you tow a trailer or haul a load that shifts, pay attention to the hinge seam and the perimeter. A mat that pulls at the tailgate can work out of position, so reseat it when you notice gaps. Choose a mat that suits your daily use: a cushioned padded layer helps on long work days, while a flat surface makes sliding loads easier.
- Inspect the strips after heavy loads
- Reseat the mat when gaps appear
- Rinse off abrasive debris
Specifications
| Brand | BedRug |
|---|---|
| Part number | IMQ15LBS |
| UPC | 870558005945 |
| Top layer | TPO composite |
| Under layer | Padded, 3/4 inch |
| Attachment | Hook and loop fasteners |
| Water absorption | None |
| Drying time | As little as 20 minutes after water exposure |
Vehicle fitment
The manufacturer fitment list names the 2015-2018 Ford F-150 in the Lariat, SSV, XL and XLT trims.
Not covered by this entry: the 2019 and newer F-150, Super Duty trucks, and the King Ranch, Platinum and Limited trims. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Hook and loop strips hold the mat, so the bed floor is not drilled. Installation takes minutes, so the work is quick even for one person.
What’s included
The mat and its hook and loop fastening system make up the package.





