Overview
The BedRug XLT Mat, part number XLTBMQ15LBS, is a custom-fit truck bed mat built from 100% polypropylene. It is designed for trucks that have an existing spray-in bed liner or no liner at all, and it lays over the bed floor to create a flat, cushioned, slip and skid resistant work surface. BedRug describes each mat as made to a specific make and model, filling the ribs and contours of the bed so the loading surface stays smooth and free of voids.
A 3/4-inch thick foam layer sits under the polypropylene top. The foam does not absorb water and resists mold and mildew. The integrated tailgate gap guard hinge crosses the seam between the bed piece and the tailgate piece, which keeps debris from settling in that gap. Hook and loop fasteners hold the mat down, so it goes in without sanding, prepping or drilling into the bed.
Key features
- 100% polypropylene top that BedRug describes as ultra-tough and essentially plastic
- Flat, slip and skid resistant surface
- Custom fit to each truck, following the bed ribs and contours
- Cushioned for comfort when kneeling and crawling in the bed
- The surface washes clean after bleach, battery acid, oil or gas
- Designed for exterior use; the material does not absorb water
- Water runs out through the zippered perimeter and factory bed drain holes, drying in as little as 20 minutes
- The polypropylene is fade and UV resistant.
Choosing a custom-fit bed mat
A custom-fit mat is only as good as its match to the bed beneath it. Truck beds vary in length, rib spacing and wheel well shape, so the surface you get depends on the bed the mat was made for. Before buying, measure the bed floor and compare it with the bed size and body style of your truck. Mats that sit on existing spray-in liners need a clean, dry surface, and a loose or gritty liner can shift the mat under load.
Hook and loop mats work well on a bed that is in good condition. Check the hook and loop strips now and then, since they can collect grit and lose grip over time. Lift the mat periodically and sweep or hose the bed underneath. Standing water trapped beneath a mat can cause trouble on bare metal, so let the bed dry after washing.
Many owners pair a bed mat with a tailgate mat or bed rails, so think about the whole cargo area. Keep heavy loads secured with tie-downs, because a flat, slip resistant surface reduces movement but does not replace proper strapping. Wear signs such as a flattened foam layer or torn hook strips mean the mat should be replaced.
Specifications
| Brand | BedRug |
|---|---|
| Part number | XLTBMQ15LBS |
| UPC | 870558005839 |
| Top material | 100% polypropylene |
| Under layer | 3/4-inch thick foam |
| Attachment | Hook and loop fasteners |
| Fit | Custom fit per truck |
| Surface | Flat, slip and skid resistant |
| Drying time | As little as 20 minutes |
Vehicle fitment
The mat is custom fit to a specific truck bed. Confirm your truck’s year, model and trim, and the bed it is sized for, before ordering.
Do not assume a fit from the XLT name alone; the bed shape has to match your truck. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The hook and loop fasteners attach the mat without drilling, sanding or prepping the bed, which is the main installation difference from bolt-on parts. Because the mat is custom fit, the bed it was made for has to match your truck before you fit it down.
What’s included
Only the XLT mat itself is named, along with its hook and loop fasteners. No extra hardware, tools or additional parts are mentioned.






