Select your vehicle

BedRug Impact Mat – IMQ15SCS

BedRug

Shop Ford F-150 Truck Bed Mats on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Custom-fit BedRug Impact Mat for 2015–2018 Ford F-150 trucks, including the Limited trim
  • TPO composite top over a 3/4-inch padded under layer
  • Tailgate hinge that crosses the bed-to-tailgate seam
  • Attaches with hook and loop fasteners, without drilling

Description

Overview

Part number IMQ15SCS is the BedRug Impact Mat for 2015–2018 Ford F-150 pickups that carry a spray-in bed liner or no liner at all. Laid over the bed floor, it gives a cushioned, flat surface that resists slipping. BedRug designed the mat around one specific make and model, so its shape follows the bed ribs and contours instead of sitting loose on top of them. The flat face gives you a steady spot to load gear, and the padding is meant to take the knocks from dropped items.

A padded layer under the TPO composite top absorbs dents and blows, and it softens the kneeling you do while working inside the bed. The integrated tailgate hinge spans the seam between the bed and the tailgate, a place where grit often collects, and the design limits that buildup. Hook and loop fasteners do the holding, so there is nothing to sand, prime or drill.

Key features

  • Flat TPO composite top that is slip and skid resistant
  • Padded 3/4-inch under layer for dents, impacts and knee comfort
  • Tailgate gap guard hinge that connects the bed piece to the tailgate piece
  • Bleach, battery acid, oil and gas are washed off the top
  • Foam that BedRug compares to life jacket material and that does not absorb water
  • Zippered perimeter lets water run out through the factory bed drain holes
  • The TPO top resists fading and UV exposure.

Before you buy

A bed mat is most useful when the floor under it is clean and the truck is used for regular loading. Before installing, sweep out grit and check that the bed floor is in good condition, since debris trapped under any mat can wear the finish over time.

Think about how you load the bed. A flat, padded surface suits tool boxes, coolers and kneeling work, while heavy items with sharp edges still benefit from being set down carefully. Confirm the truck’s year, model and trim before you order, and keep the factory drain holes clear so water can leave the bed.

  • Confirm fit for your vehicle’s year, model and trim
  • Clear the bed of debris before laying the mat down
  • Keep the drain holes unobstructed

Specifications

Brand BedRug
Part number IMQ15SCS
UPC 870558005969
Top layer TPO composite
Under layer 3/4-inch padded foam
Attachment Hook and loop fasteners
Surface Flat, slip and skid resistant
Drying time As little as 20 minutes

Vehicle fitment

The mat fits the 2015–2018 Ford F-150 in King Ranch, Lariat, Limited, Platinum, SSV, XL and XLT trims.

Ford F-250 and F-350 Super Duty trucks and F-150 years before 2015 or after 2018 are not covered. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The fasteners are hook and loop, so the mat installs without drilling, sanding or priming the bed. Water drains through the zippered edge and the factory drain holes once the mat is down.

What’s included

The kit is the mat with its hook and loop fasteners. Check the package contents against your installation before starting.

SKU: BEDIMQ15SCS Category:

Specification

Shipping weight 13.00 lbs
Package dimensions 69.00 × 12.00 × 12.00 in
brands

Fitment

VehicleYearsTrims
Ford F-1502015–2018King Ranch, Lariat, Limited, Platinum, SSV, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is the IMQ15SCS a match for the 2015 to 2018 Ford F-150 Limited?

Yes. The manufacturer fitment list includes the Limited trim for the 2015–2018 Ford F-150, along with King Ranch, Lariat, Platinum, SSV, XL and XLT. Confirm your year and trim before ordering.

Does this mat need drilling or sanding?

No. It is designed for beds with a spray-in liner or no liner and attaches with hook and loop fasteners, so no sanding, prepping or drilled holes are needed.

What is the foam under layer made of?

The under layer is 3/4-inch padded foam, which BedRug compares to life jacket foam. It does not absorb water and resists mold and mildew, and the top layer is TPO composite.

Does the mat help keep debris out at the tailgate?

Yes. The integrated tailgate gap guard hinge crosses the space between the bed piece and the tailgate piece, and it keeps debris from building up in that seam.

How should the mat be cleaned over time?

Sweep out grit and loose debris, then wash the top with mild soap and water and rinse it clean. Check the hook and loop fasteners periodically and replace them if they stop holding the mat in place.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ford F-150 Truck Bed Mats on Amazon