Overview
The Baja Designs 447110 is a fog light mounting kit that lets you install two Squadron Series auxiliary lights in the factory fog light location of the Toyota Tacoma and 4Runner. It fits the 2010–2018 Toyota 4Runner, the 2012–2018 Toyota Tacoma and the 2014–2018 Toyota Tundra.
The fog light mounting kit is a plug and play design built around two vehicle-specific fog pocket brackets and a wiring adapter. The adapter lets you keep using your factory fog light switch, and the factory mounting hardware is reused, so the auxiliary lights sit in the stock fog pocket. The lights themselves are not part of the kit.
Key features
- Mounts two Squadron Series auxiliary lights in the factory fog light location
- Plug and play design with two vehicle-specific mounting brackets and a wiring adapter
- Lets you keep using the factory fog light switch and mounting hardware
- Includes two Squadron-R Series anti-glare filler pieces
Aiming and auxiliary light use
Auxiliary lights in a fog pocket sit lower than a light bar, so their beam pattern works best for close-range visibility on trails and in dusty conditions. Once installed, aim them level with the ground and check the pattern on a wall at night. A small adjustment can make a large difference in how much light lands in the trail ahead rather than on the hood.
The fog pocket is a shallow space, so cable routing matters. Leave slack in the adapter harness and keep it clear of hot exhaust components and moving suspension parts. Check the mounting bolts after the first few trips, since vibration on rough roads can loosen fasteners that were torqued during installation.
- Aim lights level and recheck after a few trips
- Keep harness slack clear of heat and moving parts
- Confirm local rules for auxiliary lights
Specifications
| Brand | Baja Designs |
|---|---|
| Part number | 447110 |
| UPC | 852156007835 |
| Product type | Fog light mounting kit (fog pocket kit) |
| Light compatibility | Squadron Series auxiliary lights, two lights |
| Installation type | Direct fit |
| Included | Two fog pocket brackets, one wiring adapter, two Squadron-R Series anti-glare filler pieces |
Vehicle fitment
It fits the 2010–2018 Toyota 4Runner (Limited, SR5, TRD Off-Road, TRD Pro and Trail), the 2012–2018 Toyota Tacoma (Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport and X-Runner) and the 2014–2018 Toyota Tundra (1794 Edition, Limited, Platinum, SR, SR5 and TRD Pro).
Generations before these year ranges, such as earlier Tacoma and 4Runner models, are not covered by the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Owners of the 4Runner Limited should expect that slight modifications may be needed to clear the chrome accents on that trim. Auxiliary lights must follow the local road-use rules where you drive.
What’s included
The kit contains two fog pocket brackets, one wiring adapter and two Squadron-R Series anti-glare filler pieces.
Not included: The Squadron Series auxiliary lights, which must be added separately.
