Overview
The Baja Designs Fog Light Mounting Kit, part number 447103, mounts two Squadron lights in the factory fog pockets of the Ford F-150 (2004-2014), Toyota Tundra (2007-2013) and Toyota Tacoma (2005-2011).
The kit is a plug and play setup with two vehicle specific mounting brackets and a wiring adapter. The wiring adapter allows you to use your factory switch and mounting hardware.
Key features
- Two vehicle specific mounting brackets for the fog pocket
- Wiring adapter that lets you use the factory switch
- Uses factory mounting hardware
- Compatible with Squadron Racer, Squadron Pro and Squadron Sport LED lights
Mounting and wiring tips
Fog lights are usually mounted low on the front bumper, where they take road spray, gravel and wet debris. A bracket that sits in a factory fog pocket keeps the light in a protected spot and generally holds its aim better than a loose bar mount. Before fitting, check that the pocket is clean and that the bracket sits flat without forcing it.
Wiring a fog light through the factory switch is common, but the switch and relay need to handle the draw of the lights you pick. Check the current draw of the lights against the factory circuit, and use a relay if the setup calls for one. Aim the lights after mounting, with the vehicle on level ground and the tires at normal pressure.
- Clean the fog pocket before fitting the brackets
- Tighten mounting hardware after the first drive
- Recheck the aim after any bumper or suspension work
Specifications
| Brand | Baja Designs |
|---|---|
| Part number | 447103 |
| UPC | 852156007828 |
| Included brackets | 2 vehicle specific mounting brackets |
| Included adapter | 1 wiring adapter |
| Compatible lights | Squadron Racer, Squadron Pro, Squadron Sport |
| Lights | Sold separately |
| Vehicles named | Ford F-150 (2004-2014), Toyota Tundra (2007-2013), Toyota Tacoma (2005-2011) |
Vehicle fitment
It fits the Ford F-150 (2004-2014), Toyota Tundra (2007-2013) and Toyota Tacoma (2005-2011).
Verify your year, model and trim before buying.
Installation notes
The brackets mount the lights in the factory fog pocket, and the wiring adapter keeps the factory switch in use. Choose a Squadron Racer, Squadron Pro or Squadron Sport light, since the lights are sold separately.
What’s included
Two vehicle specific mounting brackets and a wiring adapter. The factory switch and mounting hardware are reused rather than supplied.
Not included: the Squadron lights, which are sold separately.









