Overview
The Baer Brakes D0627R is a rear street brake pad set for Baer Classic and IronSport rear disc brake systems. It is a ceramic friction pad sold as a kit of four pads, and it is cross-referenced to HB183, DR627 and FMSI D627.
The series is Classic/IronSport Replacement Pads and the caliper type is Classic/IronSport Rear, so this pad matches that rear caliper family. The compound is the performance ceramic used in Big Brake Kits. It gives good initial bite and consistent stopping at low to moderate operating temperatures, which suits daily driving, weekend use and mild track work. It is not intended for extreme conditions, so it is best matched to street driving rather than hard track sessions.
Key features
- Ceramic friction material for smooth, low-noise street braking
- Good initial bite at low to moderate operating temperatures
- Single-piston replacement pad for Classic and IronSport rear calipers
- Premium grade, non-slotted street pad
- Low dust levels in light to moderate stopping conditions
- Sold as an axle set, one kit of four pads
Before you replace rear pads
Rear pads wear faster on some vehicles than others, and the rotor surface is worth checking every time the pads are changed. Look for scoring, heavy blue or dark discoloration, and uneven thickness across the rotor face. A rotor in poor condition can cause new pads to vibrate or wear unevenly, so resurfacing or replacing it is often part of the same job.
Caliper hardware matters as much as the pad itself. Abutment clips and anti-rattle clips keep the pad seated and quiet, and worn clips can produce noise even with fresh friction material. Clean the caliper bracket, check that the pad slides freely, and apply brake lubricant only where the service instructions call for it, keeping it off the friction surface.
- Inspect the rotor for scoring and thickness variation before installing
- Replace worn or damaged anti-rattle and abutment clips
- Keep brake lubricant away from the friction surface
- Avoid mixing pad compounds on the same axle
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | D0627R |
| UPC | 90127862520 |
| Series | Classic/IronSport |
| Caliper type | Classic/IronSport Rear |
| Axle | Rear |
| Brake pad type | Street |
| Friction material | Ceramic |
| Grade | Premium |
| Pads per set | 4 |
| Slotted | No |
| Backing plate color | Black |
| FMSI number | D627 |
| Cross references | HB183, DR627 |
| Country of origin | IN |
| Pad shims included | No |
| Pad wear sensor included | No |
| Abutment clips included | No |
| Bolts included | No |
| Mounting hardware included | No |
Vehicle fitment
It is a rear street pad for Classic and IronSport rear systems. Mustang Cobra rear brakes (94-04) are cross-referenced to this pad, but that is not a confirmed fit.
Installation notes
Bolts, mounting hardware, abutment clips and pad shims are not included, and the caliper hardware (pad abutments and anti-rattle clips) is sold separately, so check what your caliper already has before you start. Because the pads are sold in axle sets, one kit covers one rear axle.
What’s included
Four Baer Classic/IronSport rear street brake pads with ceramic friction material, sold as one kit.
Not included: bolts, mounting hardware, abutment clips, pad shims, pad wear sensor, caliper hardware (2 pad abutments and 8 anti-rattle clips) and brake lubricant.
