Overview
The Baer Brakes D1069 is a Claw front brake pad set for Ford F-250, F-350 and F-450 Super Duty pickups. It is a ceramic brake pad set sold as a set of 4 pads, for the front axle of the vehicles listed in the fitment section below. Baer Brakes positions the Claw pad as an OE replacement for daily driving, aimed at strong braking with low noise and low dust.
The Claw is built for a balance of performance and road-going comfort, using a premium high friction ceramic compound for long pad life and low rotor wear. The pads are designed for quick break-in and minimal dust, which suits daily use on heavy pickups.
Key features
- Premium high friction ceramic compound for consistent braking performance
- OE replacement pads designed for consistent wear with minimal noise and dust
- Long pad life with low rotor wear
- Balance of performance and road-going civility for daily drivers
- Stainless steel abutment and anti-rattle hardware included with most applications
- Slotted pad design
Towing and heavy loads
Heavy-duty pickups put more heat into the brakes when towing or carrying loads, so pad choice matters. Ceramic compounds handle everyday road use with low dust and quiet operation, but sustained downhill braking with a trailer demands more from any pad.
Check pad thickness and rotor condition more often on a truck that tows. Look for uneven wear, heat discoloration on the rotor and any change in pedal feel. Brake fluid should be fresh, since it absorbs moisture and loses boiling strength over time.
Stainless abutment and noise suppression hardware keeps pads moving smoothly in the bracket, which helps even wear. Replace hardware that is corroded or worn during a pad change, and make sure the pads slide freely before driving.
- Inspect pads at every tire rotation
- Replace brake fluid on the service schedule
- Bed in new pads before towing
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | D1069 |
| UPC | 844165019558 |
| Axle | Front |
| Friction material | Ceramic |
| Grade | Premium |
| Pads per set | 4 |
| Sold as | Set |
| Slotted | Yes |
| Backing plate color | Black |
| Abutment clips included | Yes |
| Mounting hardware included | Yes |
| Brake lubricant included | No |
| Wear indicator attached | No |
| Emission code | 6 |
| Country of origin | CN |
Vehicle fitment
It fits the front axle of 2005–2008 Ford F-250 Super Duty, 2005–2011 Ford F-350 Super Duty and 2010–2012 Ford F-450 Super Duty pickups.
Model years outside these ranges are not covered, including F-450 Super Duty years after 2012 and any Ford model other than the three Super Duty pickups. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The set includes abutment clips and anti-rattle hardware for most applications, so check that the hardware matches your caliper before fitting. Brake lubricant is not included. Brake work should be completed by a qualified technician who follows the vehicle’s service procedure.
What’s included
4 pads per set, with stainless steel abutment and noise suppression hardware for most applications.
Not included: brake lubricant.
