Overview
The Baer Brakes D0632 is a set of front Claw brake pads for the 1994–1996 Ford Bronco, the 1994–2002 Ford E-150 Econoline and the 1994–1996 Ford F-150. Baer Claw pads use a ceramic friction compound and are designed as an OE-style replacement for daily driving.
Baer’s Claw pad is an affordable option for daily drivers, balancing braking performance with road-going comfort. The ceramic compound provides long-lasting, consistent performance, with quick and easy break-in and minimal dust. Each set includes stainless steel abutment and noise suppression hardware on most applications. Part number D0632 is the identifier to match when comparing or replacing pads.
Key features
- OE replacement pads with consistent wear and performance
- Premium high friction ceramic compound
- Minimal noise and dust during normal use
- Long pad life with low rotor wear
- Balance of performance and road-going civility for daily drivers
- Stainless steel abutment and anti-rattle hardware included with most pads
- Slotted pad design
Before you buy
Brake pads are a wear item, and the friction material thins with every stop. Check pad thickness through the caliper inspection window when the wheels are off, and look for uneven wear across the pad face. Squealing from the wear indicator, grinding, pulsing through the pedal or a softer pedal feel all signal that pads are near the end of their life. Uneven wear can also point to a sticking caliper slide, which should be checked before new pads go on.
Pads and rotors work as a pair. Rotors with deep scoring or a raised lip at the edge will wear new pads unevenly, so inspect them at every pad change. Lubricating the caliper slide pins and pad contact points keeps the pads moving freely and reduces noise. Bed in new pads with a series of moderate stops before any heavy braking to lay an even layer of friction material on the rotor.
- Inspect caliper slide pins during each pad change
- Check the rotor surface for scoring or a lip at the edge
- Replace abutment clips that show wear
- Bed in new pads with moderate stops
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | D0632 |
| UPC | 844165007746 |
| Sold as | Set |
| Pads per set | 4 |
| Axle | Front |
| Drive | 2WD, 4WD |
| Friction material | Ceramic |
| Grade type | Premium |
| Slotted | Yes |
| Backing plate color | Black |
| Abutment clips included | Yes |
| Brake lubricant included | No |
| Emission code | 6 |
| Country of origin | CN |
Vehicle fitment
Listed fitment covers three vehicles: 1994–1996 Ford Bronco (front), 1994–2002 Ford E-150 Econoline (front) and 1994–1996 Ford F-150 (front, RWD and 4WD). The listed entries are for the ceramic material version of these pads.
This fitment does not cover Ford Bronco or F-150 models from 1997 onward, E-150 Econoline models outside 1994–2002, or Ford E-250 and E-350 vans. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brake lubricant is not included with this set, so plan on a separate brake lubricant for the pad contact points during installation. Abutment clips come with the set, and noise suppression hardware is included on most applications. Break-in is quick and easy. Check that your vehicle matches the fitment section for axle position and drive type before installing.
What’s included
This set contains four front brake pads sold as one set, with stainless steel abutment clips and noise suppression hardware on most applications.
Not included: Brake lubricant.
