Select your vehicle

Baer Brakes SS4 Plus Deep Stage Rear Ford 8.8 Inch Rear Ends W/C-Clip Eliminators And 2.5 Inch Axle Standoff 4 Lug (4X4.25 Inch Bc) Clear Wheel Lug/Bolt Pattern 4X4.25 – 4262697C

Baer Brakes

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Baer Brakes 4262697C rear drag brake kit in clear finish for Ford 8.8 inch rear axles
  • Two 4-piston S4 calipers and high friction drag race pads
  • 11.0 inch two-piece slotted, drilled, zinc-plated rotors, 4×4.25 inch bolt pattern
  • Requires C-clip eliminators; no vehicle years or trims are given
  • Rotors pre-assembled with stainless hardware; brake hoses not included

Description

Overview

The Baer Brakes 4262697C is a rear drag brake kit for Ford 8.8 inch rear axles, with two 4-piston S4 calipers in clear finish and two 11 inch slotted, drilled rotors. Baer places it in the SS4 Plus Deep Stage range, designed for heavy, fast cars that may also see street use.

The pads are high friction, designed for drag race applications. The rotors fit wheels 15 inch and larger, and the pad types are DR1 or HB100. Confirm fit for your vehicle’s year, model and trim before ordering.

Key features

  • Two 4-piston S4 calipers in clear powder coat, with 1.75 inch pistons.
  • High friction pads designed for drag race applications.
  • Hard anodized aluminum pistons with stainless steel abutments and noise suppression clips.
  • Two-piece slotted, drilled, zinc-plated rotors on billet aluminum hats drilled for 5/8 inch wheel studs.
  • Dust and weather seals that Baer describes as T compliant.
  • Minimum wheel diameter of 15.0 inch.

Pads and heat management

High friction pads grip harder and generate more heat than most street pads. Under repeated hard stops, that heat can glaze the friction surface, reducing bite and making pedal feel inconsistent. Bedding the pads in gradually, with a few moderate stops before any hard run, helps transfer an even layer of friction material onto the rotor.

Pads and rotors wear together, so inspect both after each session. Look for glazing, scoring, heat checks or cracks in the rotor face, and uneven wear across the pad. Grooved and drilled rotors help shed heat and gas but still need periodic inspection. Keeping the pad compound matched to the rotor surface avoids premature wear on either part.

  • Bed pads in before hard use
  • Inspect the rotor surface after each session
  • Replace pads once they reach the wear indicator
  • Use fresh brake fluid suited to high heat

Specifications

Brand Baer Brakes
Part number 4262697C
UPC 844165050711
Sold as Kit
Caliper S4, 4-piston, fixed
Caliper color Clear
Calipers in kit 2
Piston size 1.75 inch
Rotor outside diameter 11.0 inch
Rotor construction 2-piece, vented
Rotor thickness 1.02
Rotor material Iron with aluminum hat
Surface Slotted, drilled and zinc plated
Friction material Semi-metallic, high friction drag race pads
Pad FMSI number DR1
Template S125A
Axle flange Ford 8.8 inch
Axle standoff 2.5 inch
Lug count 4 lug
Wheel bolt pattern 4×4.25 inch
Minimum wheel diameter 15.0 inch
Grade Performance
Park brake Not included
Brake hoses Not included
Lug nuts Not included
Emission code 6
Country of origin US

Vehicle fitment

No year, model or trim range is given for part 4262697C. Fitment is tied to the Ford 8.8 inch rear axle flange with C-clip eliminators and a 2.5 inch axle standoff.

Axles that still use C-clips are not a match for this kit. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

  • Eliminators must be in place on the axle, because the kit will not work with C-clip axles.
  • Rotors are pre-assembled with stainless hardware, and mounting hardware is included.
  • Brake hoses are not included and must be supplied separately.

Ask a qualified technician to inspect the finished installation before the first run.

What’s included

Two clear S4 calipers, two-piece slotted drilled rotors pre-assembled with stainless hardware, high friction drag race pads, and mounting hardware.

Not included: brake hoses, lug nuts and the park brake.

Specification

Shipping weight 48 lbs
Package dimensions 15 × 8 × 15 in
brands

Sold as

Kit

Wheel bolt pattern (in)

4X4.25

Lug nuts

4 Lug

Rotor type

2-Piece

Rotor style

Slotted, Drilled

Rotor construction

2-Piece

Rotor material

Iron w/Aluminum Hat

Front rotor included

No

Park brake

No

Lug nuts included

No

Country of origin

US

Questions & Answers

What does part 4262697C include?

It is a rear kit with two clear-finish S4 calipers, two-piece slotted rotors, high friction pads designed for drag race use, and mounting hardware. Brake hoses, lug nuts and the park brake are not included.

Is this kit made for a specific vehicle?

The kit is designed for Ford 8.8 inch rear axle flanges with C-clip eliminators and a 2.5 inch axle standoff. Confirm your vehicle's year, model and trim before ordering, and check your axle first.

What bolt pattern and minimum wheel size apply?

The wheel bolt pattern is 4x4.25 inch with 4 lugs, and the minimum wheel diameter is 15.0 inch. The rotor outside diameter is 11.0 inch.

When should drag pads be replaced instead of reused?

Replace them when the friction material is worn to the minimum thickness, when the surface shows heavy glazing that does not clean off, or when cracks or chunks appear. Reusing worn pads reduces stopping power and can damage the rotor faces.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon