Overview
Baer Brakes part 4262256B is a black SS4 rear disc brake kit made for Ford 8.8 Inch C-clip rear ends. Each kit pairs a four-piston S4 caliper with a 12 inch slotted and drilled rotor that is zinc plated, and a backing plate carrying a park brake shoe assembly. The axle standoff is 2.5 inch and the bolt circle is 4 on 4.25.
This black version matches the red edition of the same kit, part 4262256R, in every listed dimension. The listed pad type is FMSI DR1-C. The caliper uses a floating design and is CNC machined from forged or billet aluminum, with a powder coated finish.
Key features
- S4 caliper with four pistons and a floating layout
- Black powder coated caliper body
- Anodized aluminum pistons paired with stainless steel abutments
- Noise suppression clips fitted at the pad interface
- Dual seals for dust, weather and pressure
- Slotted, drilled and zinc-plated one-piece vented rotor
- Stainless braided hoses supplied with the kit
Caring for the rear brakes
Rear brakes on a live axle see less load than the fronts, yet they still need regular attention. Friction material wears gradually, and a glazed or uneven pad can squeal, pull or lose bite under light braking. Keep the pad pair matched across the axle so braking stays even from side to side.
Dust and road salt collect on the caliper body and backing plate, so rinse them periodically and check the bleeder screw for corrosion. A parking brake that drags after service often points to an adjuster or cable that has stopped moving freely rather than a hydraulic fault. Lubricate slide pins with brake-specific grease and keep it off the pad faces.
- Check pad thickness and wear indicators
- Look for leaks at hose fittings
- Clean the rotor face before new pads are fitted
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262256B |
| UPC | 844165028017 |
| Sold as | Kit |
| Caliper | S4, four-piston |
| Caliper color | Black |
| Caliper type | Floating |
| Rotor outside diameter | 12.0 inch |
| Rotor type | 1-piece |
| Rotor construction | Vented |
| Rotor material | Iron |
| Rotor thickness | 1.02 |
| Rotor surface | Slotted, drilled and zinc plated |
| Axle flange | Ford 8.8 Inch |
| Wheel lug count | 4 Lug |
| Wheel bolt pattern | 4×4.25 |
| Minimum wheel diameter | 16.0 inch |
| Hose material | Steel braided |
| Park brake | Yes, shoe assembly in backing plate; cables not included |
| Pad FMSI number | DR1-C |
| Template | S113E |
| Grade type | Performance |
| Country of origin | US |
Vehicle fitment
The kit is designed around the Ford 8.8 Inch axle flange with a 2.5 inch axle standoff. Confirm the axle flange and standoff match your rear axle before installation.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the rear hydraulic lines and parking brake are involved, have the work done by a qualified technician. Park brake cables are not supplied, so plan a cable source before the install. The 12 inch rotor suits wheels 16 inch and up, and the S113E template should be compared with the chosen wheel first.
What’s included
The kit includes the four-piston S4 caliper, the 12 inch rotor, the backing plate with park brake shoe assembly, and stainless braided hoses.
Not included: park brake cables, front rotor and lug nuts.















