Overview
The Baer Brakes 6920219 is a right-side, 2-piece replacement brake rotor measuring 14.000 inches across the outside and 1.150 inches thick. Its slotted surface and vented cast iron construction make it a rotor for the right wheel, with 12 mounting bolt holes on an 8.50 inch bolt circle. No vehicle is named for this part in the fitment data, so match the dimensions to the rotor being replaced.
Baer labels the rotor as directional, which means it is specific to one side of the vehicle. It is intended for right-hand installation only and is sold individually, so the left-side counterpart must be sourced as a separate part. Measure the existing rotor’s diameter, thickness and bolt pattern before installing the new one.
Key features
- Purpose-built castings from premium materials.
- Curved vane design for cooling.
- Engineered for stability and resistance to distortion.
- Dynamically balanced for smooth, vibration-free running.
- Slotted surface on a vented cast iron rotor.
- Directional, right-side-only design.
Slotted rotor care
Slotted rotors have grooves cut into the braking surface. The slots help clear water, dust and pad residue from the contact area, which can help the pads keep their grip in wet or dirty conditions. The grooves also give the pad surface an edge to wear against, so pads on a slotted disc are usually inspected more often than pads on a plain one.
Vented rotors use an internal cooling passage between two friction faces, which helps carry heat away during repeated stops. Check the rotor for cracks around the slots, deep grooves, blue heat discoloration and a pulsing pedal. Any of these signs means the rotor should be measured and possibly replaced. Remove rust from the hub face before fitting, and check runout if vibration persists after installation.
- Inspect pads at each brake service
- Look for cracks radiating from the slots
- Clean the hub face and register before mounting
- Replace the rotor when it reaches its minimum thickness
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920219 |
| UPC | 90127961841 |
| Axle | Right |
| Construction | Two piece |
| Outside diameter | 14.000 inch |
| Nominal thickness | 1.150 inch |
| Mounting bolt hole quantity | 12 |
| Mounting bolt hole circle diameter | 8.50 inch |
| Material | Cast iron |
| Solid or vented | Vented |
| Surface type | Slotted |
| Brake surface | Directional |
| Grade type | Performance |
| Emission code | 6 |
| ABS tone ring included | No |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
It is not confirmed for any specific year, make, model or trim. Compare the right-side axle position, 12-bolt pattern, 8.50 inch bolt circle, 14.000 inch diameter and 1.150 inch thickness with the existing rotor. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotor is directional, so it belongs on the right side only. The ABS tone ring is not included. A qualified technician should mount this slotted rotor and tighten the fasteners to the torque values for the vehicle.
What’s included
One right-side, 2-piece slotted replacement rotor, sold as each.
Not included: ABS tone ring. The left-side rotor is a separate part because each rotor is sold individually.
