Overview
The Baer Brakes 4262193MG is a 13-inch rear disc brake kit from the Pro Plus line, built for Ford 9 Inch Torino (late big) bearing housing ends on a 5×5.00 inch bolt pattern. The 6-piston fixed caliper is finished in Monster Green and clamps a two-piece slotted, drilled and zinc plated rotor measuring 13.0 inch across.
A one-piece park brake shoe assembly sits inside the backing plate, which also acts as the caliper mount, so the parking brake hardware is part of the kit. Rotors ship pre-assembled with NAS stainless hardware, and braided hoses are included. The 13 inch Pro Plus fits wheels 17 inches and up, though fit to every wheel design cannot be guaranteed, so check the Q082H template before mounting a wheel.
Key features
- Staggered pistons on the 6P caliper are meant to limit uneven pad wear
- Stainless steel pistons, abutments and noise suppression clips
- Dual seal design resists dust, weather and pressure
- Caliper CNC machined from forged or billet aluminum sourced in the US, then powder coated
- Slotted, drilled and zinc plated two-piece rotor with a billet aluminum hat
- NAS high grade stainless hardware supplied on the rotor
- Park brake shoe assembly built into the backing plate
Wheel and caliper clearance
Rotor diameter and wheel clearance work together. A larger rotor leaves less room between the caliper and the inside of the wheel, so spoke design and backspacing matter as much as wheel diameter. Wheel offset also changes how the caliper sits, and a wheel that clears the rotor on one axle may not clear the caliper on another. Test-fit with the template before the tires go on.
Park brake cables are a separate purchase here, so measure the cable run before ordering to confirm the routing will work. Replace braided hoses if they show chafing or swelling, and keep replacement pads matched to the FMSI D0731 pad type.
- Measure caliper-to-spoke clearance with the wheel mounted
- Check hub face and backing plate fit before the rotor goes on
- Replace pads in pairs and inspect rotor faces at each service
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262193MG |
| UPC | 90127951279 |
| Caliper | 6-piston (6P), fixed, dual seals |
| Caliper color | Monster Green |
| Caliper manufacturing location | Phoenix, AZ |
| Rotor type | 2-piece, vented |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor outside diameter | 13.0 inch |
| Rotor thickness | 1.1 |
| Minimum wheel diameter | 17.0 inch |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×5.00 inch |
| Axle flange | Ford 9 Inch Torino/Late Big Bearing (rear) |
| Brake pad type | FMSI D0731 |
| Template | Q082H |
| Brake hose | DOT approved |
| Park brake | Included; cables not included |
| Grade type | Performance |
| Sold as | Kit |
| Country of origin | USA |
Vehicle fitment
This kit has no listed vehicle year, make or model. The only reference is the rear Ford 9 Inch Torino (late big) bearing axle flange, which identifies an axle rather than a vehicle, so the match has to be checked against the axle on your own car or truck.
Confirm your vehicle’s year, model and trim before ordering. Verify axle and wheel clearance with the manufacturer before fitting.
Installation notes
- Confirm wheel clearance with the Q082H template, since the listed minimum wheel diameter is 17.0 inch.
- Braided hoses are included; bleed the system once the lines are connected.
- Have the park brake adjusted and tested by a qualified installer before the vehicle returns to service.
What’s included
- 6-piston 6P caliper in Monster Green
- 13.0 inch two-piece rotor with pre-assembled stainless hardware
- Backing plate with park brake shoe assembly
- Braided hoses and hardware
Not included: Park brake cables.
