Overview
The 4401006MG is a front Pro Plus brake kit in Monster Green, pairing a 2-piece 6-piston, 6P fixed caliper with a 14.0 inch vented, slotted, drilled and zinc-plated rotor. It fits the 2018–2025 Jeep Wrangler JL, the 2018 Jeep Wrangler JK and the 2020–2025 Jeep Gladiator JT with OE spindles and hubs.
The 14 inch Pro Plus is intended for wheels 18 inch or larger, and it uses the D0731 pad type. Wheel designs differ from maker to maker, so Baer cannot promise fit into every wheel. Test clearance with the Q082P template against your intended wheel before committing to the installation.
Key features
- Two-piece, six-piston 6P caliper made in Phoenix, AZ, in a Monster Green powder coat.
- Forged or billet aluminum parts, CNC machined from US-sourced stock.
- Stainless steel pistons, abutments and noise suppression clips.
- Staggered piston layout meant to reduce uneven pad wear.
- Dual seals that protect against dust, weather and pressure.
- Slotted, drilled, zinc-plated rotor with billet aluminum hat, delivered pre-assembled with stainless hardware.
Checking wheel clearance
Wheel offset and backspacing decide whether a large front caliper clears the spokes or barrel of a wheel. Two wheels with the same diameter can behave differently if their offset or spoke design differs, so measure before buying tires or wheels. Tire width and sidewall height also change how close the tire comes to the caliper and the control arms.
Lift height and suspension changes can shift the wheel position relative to the brake package. After any suspension work, re-check clearance at full steering lock and with the suspension compressed, since a rub can wear both the tire and the caliper. Keep the rotor mounting face clean when refitting wheels.
- Check clearance at full steering lock
- Re-check after any suspension or tire size change
- Use the template before final wheel selection
- Confirm lug nuts seat evenly against the hub
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4401006MG |
| UPC | 90127943434 |
| Sold as | Kit |
| Axle | Front |
| Caliper | 6-piston, 6P, fixed type, Monster Green |
| Rotor | 14.0 inch, vented, 2-piece slot, drilled, zinc plated |
| Rotor thickness | 1.15 |
| Rotor hat | Billet aluminum |
| Min wheel diameter | 18.0 inch |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×5.00 (inches) |
| Pad FMSI type | D0731 |
| Template | Q082P |
| Emission code | 6 |
| Hoses | Not included |
| Grade | Performance |
| Country of origin | USA |
Vehicle fitment
The kit fits the 2018–2025 Jeep Wrangler (JL), the 2018 Jeep Wrangler (JK) and the 2020–2025 Jeep Gladiator (JT) when OE spindles and hubs are in place.
Installation notes
The fitment notes specify OE spindles and hubs, so compare your front end with that requirement first. Rotor hats and hardware arrive assembled, and the mounting brackets are supplied. Confirm wheel clearance with the Q082P template. A qualified shop should handle the installation, since braking work directly affects stopping performance.
What’s included
The package covers the Pro Plus 2-piece 6-piston caliper, a slotted, drilled rotor with billet aluminum hat, all mounting brackets and hardware, and NAS high grade stainless hardware for the pre-assembled rotor.
Not included: Brake hoses. Pads of the D0731 type go with this kit; check the package contents against your installation before starting.
