Overview
The Baer Brakes 4262093S is a silver Extreme Plus rear brake system kit for Ford 8 inch and 9 inch rear axles with small bearing housing ends. It pairs a six-piston monoblock caliper with a 14 inch, two-piece slotted and drilled rotor for 5×4.50 and 5×4.75 inch wheel bolt patterns.
The kit is made in Phoenix, Arizona, from CNC-machined 2618 aluminum forging, with stainless steel pistons and dual dust and weather seals. The backing plate serves as the caliper mount and houses a one-piece park brake shoe assembly, so the kit suits rear axles that need a park brake. The 14 inch rotor fits most wheels 18 inch or larger.
Key features
- Silver powder-coated six-piston 6S monoblock caliper
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons designed to reduce uneven pad wear
- Dual seals that resist dust, weather and pressure
- Two-piece slotted, drilled and zinc-plated rotor with a billet aluminum hat
- Rotors arrive pre-assembled with NAS high-grade stainless hardware
- Stainless braided hoses included
Matching the wheel
Wheel clearance is one of the first checks with any big rotor and caliper package. A larger rotor sits closer to the spokes, and the caliper body needs room to clear the wheel barrel. Look at the wheel’s inner profile and back spacing before the kit goes on, rather than after the axle is reassembled.
Rotors and hubs also need clean mating surfaces. Remove rust and debris from the hub face so the rotor sits flat, and keep the stainless hardware in its proper place. A rotor that is not seated evenly can cause pulsation that is often mistaken for a worn pad.
- Check the inner wheel profile for clearance
- Clean the hub face before mounting the rotor
- Replace pads and rotors as a matched pair
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262093S |
| UPC | 844165035824 |
| Sold as | Kit |
| Axle | Rear |
| Axle flange | Ford 8 inch/9 inch small bearing |
| Caliper | 6S, six-piston monoblock, fixed |
| Caliper color | Silver |
| Pad type | D1247 (FMSI) |
| Rotor outside diameter | 14.0 inch |
| Rotor type | Two-piece, slotted, drilled, zinc-plated |
| Rotor material | Iron with aluminum hat |
| Rotor construction | Vented |
| Rotor thickness | 1.25 |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 |
| Minimum wheel diameter | 18.0 inch |
| Hose material | Stainless steel |
| Park brake | Included (shoe assembly in backing plate) |
| Template | N085P |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
The kit is matched to the rear axle, not to a vehicle. It covers Ford 8 inch and 9 inch rear axles with small bearing housing ends and 5×4.50/5×4.75 inch bolt patterns. Measure your axle flange and bolt pattern before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Baer recommends using the N085P template to compare the rotor and caliper against your chosen wheel, since the company cannot guarantee fit with every wheel style. The rotors arrive pre-assembled with stainless hardware, and the park brake shoe is housed in the backing plate.
What’s included
The kit contains the rear Extreme Plus brake components: the 6S caliper, 14 inch two-piece rotors, stainless braided hoses, stainless hardware and the park brake shoe assembly.
Not included: Baer does not supply park brake cables or lug nuts with this kit, and no front rotor is part of it.















